Kay's profile - activity

Hi Matthew, Sorry for the late reply, I was out of office yesterday. This is the link for the model: https://drive.googl

My set point temperature is 140F

Why is hot water temperature in tank and the water use equipment different in openstudio? Hi, I was interested in the el

Why is hot water temperature in tank and the water use equipment different in openstudio? Hi, I was interested in the el

Bonjour Julien, Thank you for the answer. My output frequency is detailed yes. If the output faucet temperature is equal

My question still remains: If yellow line (hot water) + 50F (cold water) = red line (mixed temperature at the faucet), a

Hi Matthew, Thank you for the answer. I understand that the temperature in the tank and the temperature in the faucet

Why is hot water temperature in tank and the water use equipment different in openstudio? Hi, I was interested in the el

Thank you for that suggestion. I put the peak use flow rate as 1 m3/s, gave the use flow rate fraction schedule the sam

Electricity, !- On Cycle Parasitic Fuel Type 0, !- O

0, !- Heater Minimum Capacity {W} 0, !-

WaterHeater:Mixed, Water Heater, !- Name 0.151, !

I indented it, but for some reason, it's not converting in the grey box form. I even used this link http://wittman.org/p

WaterHeater:Mixed, Water Heater, !- Name 0.151, !

WaterHeater:Mixed, Water Heater, !- Name 0.151, !

WaterHeater:Mixed, Water Heater, !- Name 0.151,

WaterHeater:Mixed, Water Heater, !- Name 0.151, !

WaterHeater:Mixed, Water Heater, !- Name 0.151, !

WaterHeater:Mixed, Water Heater, !- Name 0.151, !- Tank Volume {m3} Water Heater Setpoint Temperature,

WaterHeater:Mixed, Water Heater, !- Name 0.151, !

How do I exactly copy the WaterHeater:Mixed object from the model? I cannot copy it.

Thank you so much rraustad. This solved my first question. I was curious if you might have some insight on the second q

Thank you for the note. I have edited the question to include openstudio in it.

Water heating above the setpoint temp and results do not show energy changes with changes in water consumption I am tryi

Sorry for the late reply. I am using openstudio.

Sorry for the later reply. I am using Openstudio.

Water heating above the setpoint temp and results do not show energy changes with changes in water consumption I am tryi

Sure, thank you mdahihausen! That helps.

I intend to develop daily hot water use data in 6 minute intervals for a year, for a single household. I want to segregate the end uses by shower, dishwasher and clothes washer. I also seek to develop this data for different residential homes based on how many people are living there, how many rooms are there in the house etc.

I am new to EnergyPlus, and have basic idea of operations. But I am having trouble deciding the starting point for this synthesis; what files should i use for developing these. I would greatly appreciate some guidance on setting this up in energyplus.

Thanks, Yash

Does openstudio ever fail eg. not enough hot water to meet demand? I have a technical question about energyplus analysis

develop hot water use data for different types of residential houses I intend to develop daily hot water use data in 6 m

Create synthetic hot water use for different residential house types I intend to develop daily hot water use data in 6 m