First time here? Check out the Help page!
2019-06-24 14:55:24 -0500 | received badge | ● Popular Question (source) |
2015-04-02 11:50:56 -0500 | received badge | ● Teacher (source) |
2015-04-02 11:43:16 -0500 | answered a question | openstudio 1.7 incompatibily error with sketchup 2015 Few posts addressing similar issues: https://unmethours.com/question/1209/... https://unmethours.com/question/1783/... I would try uninstalling both using Revo. I have noticed that Openstudio tends to keep older versions of itself on your machine instead of overwriting and updating. |
2015-03-02 09:04:07 -0500 | asked a question | eQuest 3.65 model crashing during simulation I have an eQuest model using heat pump for both heating and cooling. I believe everything was modeled correctly when the model was done weeks ago, however, when I go to open it now the simulation crashes as soon as it reaches the summer months. The BDL file says the following at the end:
-CAUTION--------------------------------------------------------------------------------------NO COOLING EQUIPMENT HAS BEEN DEFINED Anyone else experience anything like this before? |
2014-12-12 10:27:02 -0500 | asked a question | Can I adjust fan CFM on a schedule in eQuest? I'm preparing an energy model in eQuest for a multifamily apartment building and have run into an issue with the DOAS system. The building has (2) AHU units supplying 100% outside air which is conditioned by a CHW and HW Loop. There is one larger unit at an estimated 18,000 cfm and a smaller unit at 12,000 cfm. Currently, they are modeled together as one 30,000 cfm VAV (with the OA and fan max and min ratios both set to 1 in order to accurately represent the operating conditions of the actual equipment). I was informed by the facility manager today that the larger AHU was actually not working for 6 months out of the year. This explains why my calibration was off during those months. Anyway, is there a way to mimic this in eQuest?
Thanks for the help! |
2014-12-08 10:06:21 -0500 | received badge | ● Supporter (source) |
2014-12-08 10:06:19 -0500 | received badge | ● Scholar (source) |
2014-12-05 11:10:32 -0500 | received badge | ● Student (source) |
2014-12-05 11:09:52 -0500 | asked a question | How to properly model this 2-pipe FCU system in eQuest 3.65? Hi everyone I'm trying to model an existing building in eQuest 3.65. The building has a chilled water loop and a hot water loop (the same pumps changeover to pump HW in winter and CHW in summer). All apartments have a non-ducted 2-pipe Fan Coil Unit. Nothing controls the coil (there's no 2-way valve), there's just a fan selector (LOW-SPEED/HI-SPEED/OFF), and there is no outside air being supplied to the apartments. I'm struggling to understand how to properly model this in eQuest:
Thanks for any insight you can provide! |