fededea94's profile - activity

Thank you, I tried to see the tutorial and sometimes I writed to the support desk, but the support desk of my country d

Thanks you have clarified some doubts but I have more. Thats are my doubts, now I'm working on a prototype building (whi

I have used OS for my thesis. Which is your problem? I already use OS and other E+ software in my job

Large model modelling Hello, I have some doubts about modelling large models for an initial analysis (such a multistore

Large building modelling Hello, I have some doubts about modelling large models for an initial analysis (such as a mult

Large model modelling Hello, I have some doubts about modelling large models for an initial analysis (such a multistore

Thank you! I think it is the solution but I have not the scripting module so I need to add these outputs on an .idf file

Designbuilder windows flow rate Hello, I have tried to see the windows flow rate with the calculated natural ventilatio

Thanks for the clarification, If can be useful in future, I have contacted the italian support and they confirmed that i

Hello,

I've some doubt about the Heating system COP and the Cooling system COP in HVAC tab. I need to insert SCOP and SEER respectively here? Or which values I need to insert here?

Thanks in advance, best regards

Yes, I saw the help and I have also contacted the support desk (they only shown me the help without any other clarificat

Thanks a lot, I have used a custom template in simple HVAC and I used manual sizing and used data relative to the insta

Hello everyone, I am trying to model an air conditioning split unit in DesignBuilder. How can I do that? Is there a built-in template? If not what is the alternative?

Thanks, Regards.

Designbuilder simple HVAC system COP Hello, I've some doubt about the Heating system COP and the Cooling system COP in

Thanks, I try to raise a ticket to DB Support and also check if with some PTAC I solve my problem.

How to model a split unit air conditioner in DesignBuilder? Hello everyone, I am trying to model an air conditioning spl

How to model a split unit air conditioner in DesignBuilder? Hello everyone, I am trying to model an air conditioning spl

Not totally, beacuse in this post they talk about the earth tubes, but in designbuilder it can be used only with schedul

earth-tube with calculated ventilation in DB Hello, It's possibile to make an eart-tube with calculated natural ventila

Thank you for the answer. I'll try to start my analysis from this kind of windcatcher. I have a question about this: do

Thank you very much, I've seen the earth tube now (I never see before because usually I use calculated natural ventilati

Natural ventilation with wind-powered roof turbine ventilator and earth-tube Hello, I need to model a natural ventilati

@Aaron Boranian thanks, I have modified the question.

Thanks, I have modified the question.

Natural ventilation with wind-powered roof turbine ventilator and earth-tube Hello, I need to model a natural ventilati

Natural ventilation with wind-powered roof turbine ventilator and earth-tube Hello, I need to model a natural ventilati

Natural ventilation with wind-powered roof turbine ventilator and earth-tube Hello, I need to model a natural ventilati