Vasco Figueiroa's profile - activity

Hi,

I have an OpenStudio Model and I want to see how the internal temperature reacts based on a certain wattage value of an ideal heating load. In other words, I want to maintain the heating load and let the internal temperature be whatever value based on the thermal model used by EnergyPlus, instead of maintaining a reference temperature.

Is this possible to be done in OpenStudio. If yes, how? Any help is appreciated.

Thanks for your answer! Looking at the heating gains parameters I/O reference, if those are set to 0, all of the electri

Thanks for your answer! Looking at the heating gains parameters ([I/O reference])(https://bigladdersoftware.com/epx/docs

Thanks for your answer! Looking at the heating gains parameters ([I/O reference])(https://bigladdersoftware.com/epx/docs

Heating/Cooling load without controlling temperature Hi, I have an OpenStudio Model and I want to see how the internal

Open circuit voltage and short circuit current for generator PV Hi, I'm currently using a PV array in my OpenStudio mod

Shading controls are being overwritten by Radiance [OpenStudio] Hi, Before I started using Radiance on my OpenStudio mo

Turns out that, besides an illuminance map, both a daylighting control and a glare sensor are required even if you don't

Error trying to use Radiance Daylighting Measure Hi, I need some illuminance values throughout the year for a thermal z

Thanks for your response! I did exactly that, using the AddIntervalScheduleFromFile measure. The problem was that while

Coefficients for DesignFlowRate in OpenStudio? Hello, I'm trying to set a DesignFlowRate to establish some sort of forc

Coefficients for DesignFlowRate in OpenStudio? Hello, I'm trying to set a DesignFlowRate to establish some sort of forc

Daytime and nighttime would be defined by the value of the Site Direct Solar Radiation: if it's 0, then it's nightime, if its bigger than zero, then its daytime. Depending on this time difference, the limits for the thermostat schedules would be different as well.

Thanks for your response! I did exactly that, using the AddIntervalScheduleFromFile measure. The problem was that while

How to define thermostat schedules based on daytime and nighttime? Daytime and nighttime would be defined by the value o

How to define thermostat schedules based on daytime and nighttime? Daytime and Nighttime would be defined by the value o

(3) heat flux from the ground. Net radiation is probably obtainable from the weather data (don't know how) and I believe

(2) Related question. I had the idea of redoing and recompiling the GreenRoof material source code, but that would take

(3) flux from the ground. Net radiation is probably obtainable from the weather data (don't know how) and I believe the

(3) flux from the ground. Net radiation is probably obtainable from the weather data (don't know how) and I believe the

(3) flux from the ground. Net radiation is probably obtainable from the weather data (don't know how) and I believe the

(3) flux from the ground. Net radiation is probably obtainable from the weather data (don't know how) and I believe the

(3) flux from the ground. Net radiation is probably obtainable from the weather data (don't know how) and I believe the

(3) flux from the ground. Net radiation is probably obtainable from the weather data (don't know how) and I believe the

(3) flux from the ground. Net radiation is probably obtainable from the weather data (don't know how) and I believe the

(2) Related question. I had the idea of redoing and recompiling the GreenRoof material source, but that would take me a

(2) Related question. I had the idea of redoing and recompiling the GreenRoof material source, but that would take me a

(1) Regarding the use case, I want to model a greenhouse and take into account the thermal load of the plants inside the

Thanks for your response! The Other Equipment type of load matches my needs, but I'm not sure how I gather weather data

Thanks for your response! The Other Equipment type of load matches my needs, but I'm not sure how I gather weather data

How to add different types of loads through an OpenStudio Measure Hi, I want to add an internal load to my OpenStudio m

Can someone please share how you modeled the effect of the trees and grass? I'm trying to model a greenhouse and I suspe

Green Roof for interior surfaces in OpenStudio? Hi, I'm trying to model a simple Greenhouse in OpenStudio and I need a