First time here? Check out the Help page!
2017-04-19 17:26:33 -0500 | received badge | ● Teacher (source) |
2017-04-19 09:11:40 -0500 | edited answer | PAT 2.1.0 Xcel EDA Reporting Just trying everything I can! Ok, see attached for the console errors. Thanks again for all your help. C:\fakepath\cons |
2017-04-19 09:10:42 -0500 | commented answer | PAT 2.1.0 Xcel EDA Reporting The data points run if I use our Xcel Reporting measure on our server, and fail if I use the BCL measure. I'm attaching |
2017-04-18 16:41:00 -0500 | answered a question | PAT 2.1.0 Xcel EDA Reporting Just trying everything I can! Ok, see attached for the console errors. Thanks again for all your help. C:\fakepath\cons |
2017-04-18 16:24:25 -0500 | commented question | PAT 2.1.0 Xcel EDA Reporting So I tried both our internal XcelEDA measure on our server and the one I downloaded from the BCL. Our internal measure r |
2017-04-18 12:31:42 -0500 | commented question | PAT 2.1.0 Xcel EDA Reporting It is the most up-to-date XcelEDAReportingandQAQC measure. I also tried downloading it again today and using that measur |
2017-04-18 10:40:33 -0500 | asked a question | PAT 2.1.0 Xcel EDA Reporting When I run the XcelEDAReportingandQAQC reporting measure on PAT2.1.0 and try to export an XML report, the program tells me that no EDAPT reporting measure was included in my run. When I pull the same measure off of the BCL, PAT fails. Any ideas? See attached for the console errors. |
2016-12-08 00:59:06 -0500 | received badge | ● Student (source) |
2016-12-07 19:57:30 -0500 | asked a question | Water Source Heat Pump Plant Loop Run Away Temperatures My condenser loop for my WSHP system runs exactly as expected until I reduce the lighting loads. Then the loop becomes too cold (-99.6 deg C) and crashes during warm-up. Does anyone have a solution to this problem? |