Hi. I am trying to get temperatures inside my spaces without any cooling system using only air exchanges. I applied a design infiltration flow rate but it doent seem to make a difference in the temperatures I get. I feel like open studio calculates the zone air temperatures considering all fenestration closed or my aim is to have the temperature when windows are open. Any propositions to help?
You can try using the ZoneVentilation:DesignFlowRate object (this is in EnergyPlus but might also be available in OpenStudio) or the airflow network in EnergyPlus. If these objects are not available in OpenStudio you can export out and use the examples files and the input output reference guide in EnergyPlus to help you fill them in. ZoneVentilation:DesignFlowRate is very straight forward though.
I think you are trying to cool down (decrease room air temperature of) your thermal zone using natural ventilation, right? Recently, I used EnergyPlus EMS sensors and actuators to open windows of a thermal zone during occupied period.
See below the way I defined actuators and sensors;
EnergyManagementSystem:Actuator,
Flow_Actuator37, ! Name
Block1:Zone1_Wall_5_0_0_14_0_14_Win, ! Component Name
AirFlow Network Window/Door Opening, ! Component Type
Venting Opening Factor; ! Control Variable
EnergyManagementSystem:Sensor,
E01airTemperature, !- Name
Block1:Zone1, !- Output:Variable or Output:Meter Index Key Name
Zone Mean Air temperature; !- Output:Variable or Output:Meter Name
EnergyManagementSystem:Sensor,
Occu_Schedule, !- Name
Office_OpenOff_Occ, !- Output:Variable or Output:Meter Index Key Name Occupancy Schedule
Schedule Value; !- Output:Variable or Output:Meter Name
One sensor is for occupancy schedule and the second one is for zone air temperature.
P.S: There are other ways of simulating natural ventilation in EnergyPlus as well.
@thiathia: The other methods are mentioned by Annie Marston. The way I did was to have one sensor for occupancy and one for indoor air temperature. There was also one actuator for venting opening factor. The EMS program was using sensor values and if occupancy was greater than 1 and indoor air temperature was greater than 23C, then it opened the windows. A venting factor of 0 means window fully closed and a factor of 1 means the other way around.
@thiathia pls inbox me djbox9@gmail.com i need u to teach me
Asked: 2015-07-11 09:41:34 -0600
Seen: 934 times
Last updated: Jul 13 '15
can i contact u,i m trying to get the same indoor temperature,but i cant