Unmet heating and cooling hours question

asked 2018-05-08 14:06:43 -0500

Arch2010
129 ●7

updated 2018-05-08 22:46:56 -0500

I'm experimenting with energy modeling using Openstudio through Honeybee. I modeled a building and I used the ideal air load system. I got some unmet heating and cooling hours. Shouldn't an ideal air load system yield 0 unmet heating and cooling hours considering it is ideal (energy coming in the zone = energy going out of the zone)? Am I misunderstanding something here!

edit retag flag offensive close merge delete

Comments

@Arch2010 could you post a link to your model?

Avi ( 2018-05-09 10:48:49 -0500 )edit

add a comment

2 Answers

Sort by » oldest newest most voted

answered 2018-05-09 07:32:33 -0500

rraustad

13599 ●72 ●12 http://www.fsec.ucf.edu/

The ZoneHVAC:IdealLoadsAirSystem can also be used to model a real system. For "ideal" modeling make sure the inputs for Cooling Limit and Heating Limit are set to "NoLimit" and that the Cooling/Heating Availability Schedule input fields are blank (always available). If this still produces unmet hours, plot zone temp, zone set point temperature and unmet hours reports (then zoom in on a few days) to see when this is happening.