tenna031's profile - activity

Create Coil:UserDefined with OpenStudio Hi folks, Does OpenStudio SDK allow us to create a Coil:UserDefined object as d

As @Jason DeGraw mentioned, E+ stitches together chunks of month-long data:

Thanks for the detailed response Jason. Sure enough, I saw 8760 hours of data. And stitching them together into a single

EPW data is incomplete Hi folks, When I apply a Whole Building measure on OpenStudio and load an EPW file, I get the fo

EPW data is incomplete Hi folks, When I apply a Whole Building measure on OpenStudio and load an EPW file, I get the fo

EPW data is incomplete Hi folks, When I apply a Whole Building measure on OpenStudio and load an EPW file, I get the fo

EPW data is incomplete Hi folks, When I apply a Whole Building measure on OpenStudio and load an EPW file, I get the fo

EPW data is incomplete Hi folks, When I apply a Whole Building measure on OpenStudio and load an EPW file, I get the fo

Thanks for your comment Brian. What did the trick for me was setting the keyName to "Environment". outVarName = "Site

OpenStudio Measure - Weather Output via EMS Hey folks, I've been trying to output the following weather variables via E

AirloopHVAC:UnitarySystem Heating & Fan EMS Hi all, I'm overriding the heating energy delivered by a unitary HVAC s

AirloopHVAC:UnitarySystem Heating & Fan EMS Hi all, I'm overriding the heating energy delivered by a unitary HVAC s

After reading through the EnergyPlus Engineering Reference 9.2.0, I found this: While the unitary system may be co

AirloopHVAC:UnitarySystem Heating with EMS Hey all, I'm using an AirloopHVAC:UnitarySystem to model an RTU so I can ove

AirloopHVAC:UnitarySystem Heating with EMS Hey all, I'm using an AirloopHVAC:UnitarySystem to model an RTU so I can ove

AirloopHVAC:UnitarySystem Heating with EMS Hey all, I'm using an AirloopHVAC:UnitarySystem to model an RTU so I can ove

Wonderful. I will give this a shot! Thanks so much Aaron. This had stumped me for a while now: see here

Wonderful. I will give this a shot! Thanks so much Aaron. This had stumped me for a while now see here

Wonderful. I will give this a shot! Thanks so much Aaron. This had stumped me for a while now ( [see here] )(https://unm

Wonderful. I will give this a shot! Thanks so much Aaron. This had stumped me for a while now see here

Hmm, so if we sized the HVAC's 50% cooling capacity to be 50 kBTU and the predicted sensible zone load was 38 kBTU at on

That's a very neat suggestion Aaron, thanks! I was not aware that we were able to actuate sensible loads. I will try to

EMS - Implement overheating and overcooling Hey all, In the real world, a staged RTU will always overcool or overheat.

Thanks for the link Brian.

Thanks for your feedback. I'm using multiple calling managers and was curious to see if any previous managers would get

Thanks for your feedback. I'm using multiple calling managers and was curious to see if any previous managers would get

EMS via OpenStudio - multiple EMS Calling Manager objects Hello everyone, Is it okay to create multiple EMS calling man

EMS via OpenStudio - multiple EMS Calling Manager objects Is it okay to create multiple EMS calling managers inside a me

Activating HVAC stages via BCVTB Hi, Energyplus appears to have some subtleties when it comes to controlling HVAC equip

Hi Brian, thanks much for your comment. wrt to your code above, does this mean EP actually allows us to turn on and off

That's interesting. I was checking out the 9.2 I/O documentation at https://energyplus.net/sites/all/modules/custom/nrel

"An actuator called “AirTerminal:SingleDuct:ConstantVolume:NoReheat” is available with a control type called “Mass Flow

That's interesting. I was checking out the 9.2 I/O documentation and found this section:

Thanks for your feedback. That's right, I wanted to verify that a zone damper can be modeled as a AirTerminal:SingleDuct

It looks like AirTerminal:SingleDuct:Uncontrolled is now obsolete, and in the above case AirTerminal:SingleDuct:Constant

Zone equipment without VAV Hi everyone, I'm new to OS and Energyplus and I'm trying to set up a simple model with a cent

Output HVAC stages in OpenStudio DView Hey folks, Newbie to the OpenStudio/EnergyPlus universe here. So I wanted to look

Thank you for your reply Brian. I will check out the measures in your link.

Openstudio - expose HVAC on/off for BCVTB Hi, I'm trying to manually turn on/off an RTU's heating/cooling stages for a