Westely's profile - activity

Why does the availability managers night cycle can't show the zone Hello all: I set an AM night cycle in my model, and s

@David Thanks, it helps a lot!

I did some research before, seems FCU in Openstudio is a zone equipment, so one FCU only work for one zone? In my case,

I did some research before, seems FCU in Openstudio is a zone equipment, so one FCU only work for one zone? In my case,

@David yes, I want to use the terminal to control the zone temperature. The schedule setpoint manager controls the suppl

And yes, I set the high heating setpoint to see if the zone temperature increase, but it is not. I changed the schedule

@David: Thanks David, the air loop is an FCU serving a small office area which is divided into three offices (A, B, C) a

The simulated zone temperature does not meet the thermostat Schedule? Hi All: I simulate a small office with a fan with

The simulated zone temperature does not meet the Thermostat Schedule? Hi All: I simulate a small office with a fan with

The simulated zone temperature does not meet the Thermostat Schedule? Hi All: I simulate a small office with a fan with

ok.....I will check more.....

Thanks. I went through the question before, but get no answer how to achieve the solar data for simulation. I have othe

How to get the actual solar data from weather data? I am trying to develop an actual weather file for simulation, so I n

@mdahlhausen I use another laptop and it does not work. I do apply the measure and resave it, the file size does not cha

@mdahlhausen I tested it using an empty v2.8 model, shows run Result: Success, but the schedule is not in the. osm. or m

I updated and the path works, but it does not show the schedule object in the model. I will try tomorrow. Thank you for

@mdahlhausen Thank you for updating the measure, but it does not work on my case still. It runs successfully, shows " Re

it is from ModelUserScript as OpenStudio::Measure::ModelMeasure, I just guess may schedule:file translate the model to

and one more question, when I run the written measure in main post (which runs now) , it shows "Translating the OpenStud

Yes, I tried that before. but the measure doesn't work on my laptop. I use openstudio 2.8.0...and I don't know why, so I

Thanks, got it ~

How to load Schedule:File in OpenStudio? I read some posts and see the "schedule:file" works in OpenStudio now. Is there

Is there any way to set the actual supply air temperature hourly for FCU and OA? Hi all: I am running a small office mod

How to simulate the on/off time for an FCU using OS or E+? Hi all: I am working on an FCU serving an open office. I want

What kind of costs? To calibrate a model, you usually compare the actual energy bill to the simulated result, so it depe

One FCU serving multiply zones, and with an outdoor air MAU Hello all: I am trying to model an FCU serving three small o

One FCU serving multiply zones, and with an outdoor air MAU Hello all: I am trying to model an FCU serving three small o

I use openstudio~sorry I tried to add the tag but failed.

One FCU serving multiply zones, and with an outdoor air MAU Hello all: I am trying to model an FCU serving three small o

One FCU serving multiply zones, and with an outdoor air MAU Hello all: I am trying to model an FCU serving three small o

One FCU serving multiply zones, and with an outdoor air MAU Hello all: I am trying to model an FCU serving three small o

One FCU serving multiply zones, and with an outdoor air MAU Hello all: I am trying to model an FCU serving three small o

Thank you for your reply! but I don't have the actual internal wall temperature, should I only model a room, and define

How to simulate a single room with FCU in a building using Open studio? Hi All: I need to simulate a FCU which supplies

How to simulate a single room with FCU in a building using Open studio? Hi All: I need to simulate a FCU which supplies

Thanks! I've solved it!

How to merge OS spaces? Hi all: I developed a building model in SketchUp, and I try to merge two spaces into one. I foll