Elissa's profile - activity

1._How can I define the North Axis angle in my model if the geo-location is not available for my SU version (SU Pro 2016).

After I finished the geometry, I realized the EAST facade is oriented wrong. I read in some of the answered questions here that the green axis represents north in my model, which was supposed to be correct, but when I use the Shadow tab and start swiping from morning to afternoon in SU I realize the sun is rising in the wrong facade. 2._If I rotate the building does that interfere in the simulation? I mean, will OS understand the correction in the orientation I've done?

3._In Legacy/Euclid there is a place to configure the north axis angle, but in OS no. So, how can I make sure it is correct in OS?

Thanks

Hello,

I'm using SU Pro 2016 + OpenStudio 1.10.0 and watching and reading the tutorials I realized I do not have the bar/buttons "Rendering Settings" available for temperature simulations.

How can I load it into my version?

Thank you.

There isn´t any value. Let me explain better, maybe I was not very clear... When I open the results viewer, I can access

How can I get the measure "air speed (m/s)" to be seen in results viewer? I'm using OS 1.10.0 + SU Pro 2016 and EP 8.4.0

I'm using OS 1.10.0 + SU Pro 2016 and EP 8.4.0

I'm calculating PMV and PPD for my model and I've already selected the necessary measures for calculating it, but there's one I don't know where to find or how to add in "Output Variables", which is AIR SPEED/AIR VELOCITY (or indoor air speed) of each space of the residential model I'm working in.

The only one according to air speed I found was "Zone Outdoor Air Wind Speed" which is not an interior measure.

Could you help me find/add it please?

There isn´t any value. Let me explain better, maybe I was not very clear... When I open the results viewer, I can access

There isn´t any value. Let me explain better, maybe I was not very clear... When I open the results viewer, I can acces

How can I get the measure "air speed" to be seen in results viewer? I'm using OS 1.10.0 + SU Pro 2016 and EP 8.4.0 I'm

How can I get the measure "air speed" in results viewer? I'm using OS 1.10.0 + SU Pro 2016 and EP 8.4.0 I'm calculating

How can I get the measure "air speed" in results viewer? I'm using OS 1.10.0 + SU Pro 2016 and EP 8.4.0 I'm calculating

How can I get the measure "air speed" in results viewer? I'm using OS 1.10.0 + SU Pro 2016 and EP 8.4.0 I'm calculating

Thanks a lot. But, does this issue with the measure (the fact that the shadings do not appear attatched to the building'

Thanks a lot. But, does this issue with the measure (the fact that the shadings do not appear attatched to the building'

Does this issue with the measure (the fact that the shadings do not appear attatched to the building's geometry) interfe

Does this issue with the measure (the fact that the shadings do not appear attatched to the building's geometry) interfe

@David Does this issue with the measure (the fact that the shadings do not appear attatched to the building's geometry)

Does this issue with the measure (the fact that the shadings do not appear attatched to the building's geometry) interfe

Does this issue with the measure (the fact that the shadings do not appear attatched to the building's geometry) interfe

Shadings are out of building's geometry in View Data Reportings Hello, When I open View Data Reporting the shadings are

In the OpenStudio SU Plugin the shadings seem to be corret (attatched to the building geometry). The problem is when I o

In the OpenStudio SU Plugin the shadings seem to be corret (attatched to the building geometry). The problem is when I o

When I enter Inspector and click in "OS SurfaceShadingGroup", in the tab "Direction of Relative North", it is written 0

When I enter Inspector and click in "OS SurfaceShadingGroup", in the tab "Direction of Relative North", it is written 0

Right. But how can I fix the shadings by seeing them attatched to the building's geometry in View Data Reporting Measure

Right. But how can I fix the shadings by seeing them attatched to the building's geometry in View Data Reporting Measure

Hello,

I'm trying to see temperature results in Results Summary, I've tried checking many things in OS Inspector in order to correct problems regarding the surface settings, but couldn't fix it. In "View Data Reporting Measure" there is a window that appears WHITE in the simulation and I don't know how to correct it (or if it is the result of a mistake anyway), or why this might be happening. Could you help me explaining that, please?

Thanks.

according to the North orientation of the building I changed the North Axis as suggested before. What I need to know is:

according to the North orientation of the building I changed the North Axis as suggested before. What I need to know is:

according to the North orientation of the building I changed the North Axis as suggested before. What I need to know is:

Right. But how can I fix the shadings by seeing them attatched to the building's geometry? I'm afraid the results did no

in Building, I typed 158 for the North Axis when I finished the geometry and realized east and west were inverted. Is it

in Building, the North Axis = 158 is it possible to correct? Does that interfere in the simulation temperature results?

in Building, the North Axis = 158

Shadings are out of building's geometry in View Data Reportings Hello, When I open View Data Reporting the shadings are

Shadings are out of building's geometry in View Data Reportings Hello, When I open View Data Reporting the shadings are

Shadings are out building's geometry in View Data Reportings Hello, When I open View Data Reporting the shadings are se

It worked! Thanks!

Shadings are out building's geometry in View Data Reportings? Hello, When I open View Data Reporting the shadings are s

How to fix shadings out building's geometry in View Data Reportings? Hello, When I open View Data Reporting the shading

How to fix shadings out of the building geometry in View Data Reportings? Hello, When I open View Data Reporting the sh

How to fix shadings out of the building geometry in View Data Reportings? Hello, When I open View Data Reporting the sh

How to fix shadings out of the building geometry in View Data Reportings? Hello, When I open View Data Reporting the sh

I've done that already and no difference between them was found, as I mentioned above.