First time here? Check out the Help page!
2017-02-06 05:22:47 -0500 | received badge | ● Scholar (source) |
2017-02-06 05:22:24 -0500 | commented answer | Creating a ventilation system with specified overall ach and outdoor ach Thank you, works like a charm! Could I also put 10 ACH as the maximum flow rate and then make the fresh air ACH vary between 50% and 100% of the maximum flow rate? |
2017-02-06 05:22:08 -0500 | answered a question | Creating a ventilation system with specified overall ach and outdoor ach Thank you, works like a charm! Could I also put 10 ACH as the maximum flow rate and then make the fresh air ACH vary between 50% and 100% of the maximum flow rate? |
2017-02-03 12:06:25 -0500 | received badge | ● Student (source) |
2017-02-03 10:53:14 -0500 | asked a question | Creating a ventilation system with specified overall ach and outdoor ach I have been trying to make an air loop in OpenStudio with several zones and a standard of 10 air changes, where the recirculation rate is max 50%. So basically I would like a minimum of 5 fresh air changes and a total supply air flow of 10 air changes. I can not figure out how to do this, I have tried setting the outdoor air flow air changes per hour to 5 and the design supply air flow rate to the double of that amount, but almost no air is recirculated when I run the simulation. Does anybody have recommendations? |