Revision history [back]

So:

1. I create my empty AirLoop, and
2. I added an Outdor Air System,
3. I choose my Thermal Zones
4. In the Thermal Zone, I put an humidstat.
5. The Humidstat has a setpoint, fixed on 50% maximum and 30% minimum (but I try also to change the values : nothing changes)
6. Add a Air Terminal Single Duct Uncontrolled Diffuser ,
7. and finally I place my Unitary System near the OAS

The result is: relative humidity 100% sll the time, never under 80%! I don't understand what i did wrong...

C:\fakepath\Untitled.png

So:

1. I create my empty AirLoop, and
2. I added an Outdor Air System,
3. I choose my Thermal Zones
4. In the Thermal Zone, I put an humidstat.
5. The Humidstat has a setpoint, fixed on 50% maximum and 30% minimum (but I try also to change the values : nothing changes)
6. Add a Air Terminal Single Duct Uncontrolled Diffuser ,
7. and finally I place my Unitary System near the OAS

The result is: relative humidity 100% sll the time, never under 80%! I don't understand what i did wrong...

C:\fakepath\Untitled.png