 | 1 | initial version |
Hi guys, I'm modeling an office building with multiple levels on OS 2.2. When I noticed that heat addition from lights were quite high, I wanted to set a fraction of that heat would go in the return air of a plenum, but that field in the Loads 'Light Definitions' (Return Air Fraction) is blocked.
What are my options to send a fraction of the heat from my fixtures out of my thermal zones ? Do I have to make a plenum ? Other Ideas ?
Cheers ! !
| | 2 | retagged |
Hi guys, I'm modeling an office building with multiple levels on OS 2.2. When I noticed that heat addition from lights were quite high, I wanted to set a fraction of that heat would go in the return air of a plenum, but that field in the Loads 'Light Definitions' (Return Air Fraction) is blocked.
What are my options to send a fraction of the heat from my fixtures out of my thermal zones ? Do I have to make a plenum ? Other Ideas ?
Cheers ! !
| | 3 | retagged |
Hi guys, I'm modeling an office building with multiple levels on OS 2.2. When I noticed that heat addition from lights were quite high, I wanted to set a fraction of that heat would go in the return air of a plenum, but that field in the Loads 'Light Definitions' (Return Air Fraction) is blocked.
What are my options to send a fraction of the heat from my fixtures out of my thermal zones ? Do I have to make a plenum ? Other Ideas ?
Cheers ! !
| | 4 | retagged |
Hi guys, I'm modeling an office building with multiple levels on OS 2.2. When I noticed that heat addition from lights were quite high, I wanted to set a fraction of that heat would go in the return air of a plenum, but that field in the Loads 'Light Definitions' (Return Air Fraction) is blocked.
What are my options to send a fraction of the heat from my fixtures out of my thermal zones ? Do I have to make a plenum ? Other Ideas ?
Cheers ! !
| | 5 | retagged |
Hi guys, I'm modeling an office building with multiple levels on OS 2.2. When I noticed that heat addition from lights were quite high, I wanted to set a fraction of that heat would go in the return air of a plenum, but that field in the Loads 'Light Definitions' (Return Air Fraction) is blocked.
What are my options to send a fraction of the heat from my fixtures out of my thermal zones ? Do I have to make a plenum ? Other Ideas ?
Cheers ! !
