Revision history [back]

After assigning 32 Fan Coil Units and 3 Fresh Air Handling Units with COPs, simulation is giving error for FAHUs. It says:

1. Too many zone mixers in Return Air Path=FAHU1 DEMAND SIDE RETURN PATH
2. Too many zone mixers in Return Air Path=FAHU2 DEMAND SIDE RETURN PATH
3. Too many zone mixers in Return Air Path=FAHU3 DEMAND SIDE RETURN PATH
4. Return air Path(s) did not pass integrity testing

What is the solution to this? Because 8 zones are assigned to FAHU1, 8 to FAHU2 and 12 to FAHU3.

After assigning 32 Fan Coil Units and 3 Fresh Air Handling Units with COPs, simulation is giving error for FAHUs. It says:

1. Too many zone mixers in Return Air Path=FAHU1 DEMAND SIDE RETURN PATH
2. Too many zone mixers in Return Air Path=FAHU2 DEMAND SIDE RETURN PATH
3. Too many zone mixers in Return Air Path=FAHU3 DEMAND SIDE RETURN PATH
4. Return air Path(s) did not pass integrity testing

What is the solution to this? Because 8 zones are assigned to FAHU1, 8 to FAHU2 and 12 to FAHU3.

After assigning 32 Fan Coil Units and 3 Fresh Air Handling Units with COPs, simulation is giving error for FAHUs. It says:

1. Too many zone mixers in Return Air Path=FAHU1 DEMAND SIDE RETURN PATH
2. Too many zone mixers in Return Air Path=FAHU2 DEMAND SIDE RETURN PATH
3. Too many zone mixers in Return Air Path=FAHU3 DEMAND SIDE RETURN PATH
4. Return air Path(s) did not pass integrity testing

What is the solution to this? Because 8 zones are assigned to FAHU1, 8 to FAHU2 and 12 to FAHU3.