Revision history [back]

i try to setup parametric for air change value as follow:

INPUT LOADS .. PARAMETER PAIR = 0.2 .. .... AIR-CHANGES/HR =PAIR TIMES 2.0
END .. COMPUTE LOADS .. COMPUTE SYSTEMS .. COMPUTE PLANT .. PARAMETRIC-INPUT FOR LOADS .. PARAMETER AIR-CHANGES/HR =1.0 .. END .. COMPUTE LOADS .. COMPUTE SYSTEMS .. COMPUTE PLANT .. STOP ..

It runs 2 times but the second is not meet new air-change/hr value. what's wrong inside my syntax. Thanks

i try to setup parametric for air change value as follow:

INPUT LOADS .. ..
PARAMETER PAIR = 0.2 .. .... ..
....
AIR-CHANGES/HR =PAIR TIMES 2.0
END .. ..
COMPUTE LOADS ..
COMPUTE SYSTEMS ..
COMPUTE PLANT .. ..
PARAMETRIC-INPUT FOR LOADS .. PARAMETER ..
PARAMETER AIR-CHANGES/HR =1.0 .. END .. ..
COMPUTE LOADS ..
COMPUTE SYSTEMS ..
COMPUTE PLANT .. ..
STOP ..

It runs 2 times but the second is not meet updated with new air-change/hr value. what's wrong inside my syntax. syntax ? Thanks

i try I'm trying to setup parametric for air change value as follow:follows:

INPUT LOADS  .. 
 
PARAMETER PAIR = 0.2 .. 
 
.... 
 
AIR-CHANGES/HR       =PAIR TIMES 2.0 
 
END .. 
 
COMPUTE LOADS .. 
 
COMPUTE SYSTEMS .. 
 
COMPUTE PLANT .. 
 
PARAMETRIC-INPUT FOR LOADS .. 
 
PARAMETER AIR-CHANGES/HR    =1.0 
END .. 
 
COMPUTE LOADS .. 
 
COMPUTE SYSTEMS .. 
 
COMPUTE PLANT .. 
 
STOP ..
..

I'm trying to setup parametric for air change value as follows:

INPUT LOADS  ..   
PARAMETER PAIR = 0.2 ..   
....   
AIR-CHANGES/HR       =PAIR TIMES 2.0  
END ..  
COMPUTE LOADS ..  
COMPUTE SYSTEMS ..  
COMPUTE PLANT ..  
PARAMETRIC-INPUT FOR LOADS ..  
PARAMETER AIR-CHANGES/HR    =1.0 
END ..   
COMPUTE LOADS ..    
COMPUTE SYSTEMS ..  
COMPUTE PLANT ..   
STOP ..

It runs two times but the second run is not updated with new air-change/hr value. What's wrong with my syntax?syntax?
Have any script/program to automatically export doe 2.1e report to BEPS ?