Question-and-Answer Resource for the Building Energy Modeling Community
Get s tarted with the Help page
Ask Your Question

Revision history [back]

click to hide/show revision 1
initial version

what's the typical mean radiant temperature setpoint/schedule for radiant floor heating system

Hi everyone,

I am doing a simulation for a radiant floor heating system. Now I am using a template found in BCL(by apply measure). The HVAC template I used named AEDG Office HVAC radiant DOAS. Now the schedule for the thermostat is 18.3 C to 18.9. My question is when I run the simulation in E+, the variable shows the mean temperature would be below 18, sometimes to 15 C in this case. I dont know why. Beside what's the typical setpoint for the mean radiant temperature of a residential building?

what's the typical mean radiant temperature setpoint/schedule for radiant floor heating system

Hi everyone,

I am doing a simulation for a radiant floor heating system. Now I am using a template found in BCL(by apply measure). The HVAC template I used named AEDG Office HVAC radiant DOAS. Now the schedule for the thermostat is 18.3 C to 18.9. My question is when I run the simulation in E+, the variable shows the mean temperature would be below 18, sometimes to 15 C in this case. I dont know why. Beside what's the typical setpoint for the mean radiant temperature of a residential building?

what's the typical mean radiant temperature setpoint/schedule for radiant floor heating system

Hi everyone,

I am doing a simulation for a radiant floor heating system. Now I am using a template found in BCL(by apply measure). The HVAC template I used named AEDG Office HVAC radiant DOAS. Now the schedule for the thermostat is 18.3 C to 18.9. My question is when I run the simulation in E+, the variable shows the mean temperature would be below 18, sometimes to 15 C in this case. I dont know why. Beside what's the typical setpoint for the mean radiant temperature of a residential building?

what's the typical mean radiant temperature setpoint/schedule for radiant floor heating system

Hi everyone,

I am doing a simulation for a radiant floor heating system. Now I am using a template found in BCL(by apply measure). The HVAC template I used named AEDG Office HVAC radiant DOAS. Now the schedule for the thermostat is 18.3 C to 18.9. My question is when I run the simulation in E+, the variable shows the mean temperature would be below 18, sometimes to 15 C in this case. I dont know why. Beside what's the typical setpoint for the mean radiant temperature of a residential building?