 | 1 | initial version |
I have a zone on the roof of a building that is well insulated, maintaining a temperature of 350 deg F. For some reason, I am getting the following error message:
* Severe * Temperature (low) out of bounds [-128.21] for zone="PC1_OVEN", for surface="PC1OVEN:PC1OVEN_WALL_3_0_0"
There are no cooling loads in this zone, and the natural weather is not anywhere near cold enough to cause anything to be -128.21 degrees. Any suggestions on where this error might come from?
| | 2 | retagged |
I have a zone on the roof of a building that is well insulated, maintaining a temperature of 350 deg F. For some reason, I am getting the following error message:
* Severe * Temperature (low) out of bounds [-128.21] for zone="PC1_OVEN", for surface="PC1OVEN:PC1OVEN_WALL_3_0_0"
There are no cooling loads in this zone, and the natural weather is not anywhere near cold enough to cause anything to be -128.21 degrees. Any suggestions on where this error might come from?
| | 3 | retagged |
I have a zone on the roof of a building that is well insulated, maintaining a temperature of 350 deg F. For some reason, I am getting the following error message:
* Severe * Temperature (low) out of bounds [-128.21] for zone="PC1_OVEN", for surface="PC1OVEN:PC1OVEN_WALL_3_0_0"
There are no cooling loads in this zone, and the natural weather is not anywhere near cold enough to cause anything to be -128.21 degrees. Any suggestions on where this error might come from?
