You can start with HVACTemplate objects.
for split unit DX system, each zones will need :
HVACTemplate:Thermostat object to control the temperature within setpoint schedules.
HVACTemplate:Zone:Unitary for the demand side indoor unit
HVACTemplate:System:Unitary for the supply side system unit.
Thank you, I've have tried this but it won't run and it keeps giving me this error, which I can't figure out to fix :/ izeAirLoopBranches: AirLoopHVAC AIR LOOP CLG TZ1 has air flow less than 1.0000E-003 m3/s. * ~~~ * Primary air system volumetric flow rate = 0.0000 m3/s. * ~~~ * Check flow rate inputs for components in this air loop and, * ~~~ * if autosized, check Sizing:Zone and Sizing:System objects and related inputs.
can you try adding more design days? probably try adding all the 12 monthly design days data to SizingPeriod:DesignDay
and make sure all the supply flow rates from the hvac template input are autosized.
if the problem persist, can you upload your model / idf file here?
I use PTHP. It's a zone level piece of equipment and you won't have to deal with the air loop branches.
Asked: 2024-03-07 08:48:46 -0600
Seen: 203 times
Last updated: Mar 11
