Fatal error in Open Studio simulation

asked 2022-06-02 11:05:10 -0600

updated 2022-06-02 13:19:13 -0600

Hello,

Could you please check this output and let me know what I did wrong? I have 2 severe errors and one fatal error that I don't quite understand.

Thank you

Program Version,EnergyPlus, Version 9.4.0-998c4b761e, YMD=2022.06.02 16:26,
** Severe  ** <root>[BuildingSurface:Detailed][Surface 591] - Missing required property 'construction_name'.
** Severe  ** <root>[FenestrationSurface:Detailed][Sub Surface 212] - Missing required property 'construction_name'.
**  Fatal  ** Errors occurred on processing input file. Preceding condition(s) cause termination.
...Summary of Errors that led to program termination:
..... Reference severe error count=2
..... Last severe error=<root>[FenestrationSurface:Detailed][Sub Surface 212] - Missing required property 'construction_name'.
************* Warning:  Node connection errors not checked - most system input has not been read (see previous warning).
************* Fatal error -- final processing.  Program exited before simulations began.  See previous error messages.
************* EnergyPlus Warmup Error Summary. During Warmup: 0 Warning; 0 Severe Errors.
************* EnergyPlus Sizing Error Summary. During Sizing: 0 Warning; 0 Severe Errors.
************* EnergyPlus Terminated--Fatal Error Detected. 0 Warning; 2 Severe Errors; Elapsed Time=00hr 00min  0.46sec
edit retag flag offensive close merge delete

Comments

2

@Summertime_244 does this post and/or this post answer your question? You likely either didn't create a construction assembly for the surface (wall/roof/floor) named "Surface 591" and subsurface (window/door/skylight/etc.) named "Sub Surface 212", or didn't assign the type (outdoor/ground/etc.) of construction assemblies for these surfaces to the construction set that you're using.

Aaron Boranian's avatar Aaron Boranian  ( 2022-06-02 11:25:08 -0600 )edit