Hello Users, I want to add an ideal loads air system to my building. I receive following error:
" * Severe * Orphaned ZoneHVAC object found. This was object never referenced in the input, and was not used. "
Where do i have to reference the input?
Regards, Arne
You're missing the ZoneHVAC:EquipmentList, and probably the ZoneHVAC:EquipmentConnections.
Take a look at the example file PurchAirTables.idf for example. Here are the actual bits you do need:
ZoneHVAC:EquipmentList,
Zone1Equipment, !- Name
SequentialLoad, !- Load Distribution Scheme
ZoneHVAC:IdealLoadsAirSystem, !- Zone Equipment 1 Object Type
Zone1Air, !- Zone Equipment 1 Name
1, !- Zone Equipment 1 Cooling Sequence
1, !- Zone Equipment 1 Heating or No-Load Sequence
, !- Zone Equipment 1 Sequential Cooling Load Fraction Schedule Name
; !- Zone Equipment 1 Sequential Heating Load Fraction Schedule Name
ZoneHVAC:IdealLoadsAirSystem,
Zone1Air, !- Name
, !- Availability Schedule Name
NODE_1, !- Zone Supply Air Node Name
[...];
ZoneHVAC:EquipmentConnections,
West Zone, !- Zone Name
Zone1Equipment, !- Zone Conditioning Equipment List Name
Zone1Inlets, !- Zone Air Inlet Node or NodeList Name
, !- Zone Air Exhaust Node or NodeList Name
NODE_4, !- Zone Air Node Name
NODE_5; !- Zone Return Air Node or NodeList Name
NodeList,
Zone1Inlets, !- Name
NODE_1; !- Node 1 Name
Asked: 2020-01-17 05:13:13 -0600
Seen: 375 times
Last updated: Jan 17 '20
Please try to tag your question with the software you're using (EnergyPlus).
(The developers (of energyplus and openstudio at least) watch these specific tags to provide support, that's why we often insist on this. Your question risks slipping through the cracks. Also, this is a software agnostic Q&A site, so being clear on which software is good practice too).
I am using the IDF Editor Version 9.1.