Problem in running simulation in OpenStudio and EnergyPlus
Hey everyone :)
When I run the simulation in OpenStudio i get this message:
I also exported an IDF file from OpenStudio and tried to run a simulation with EnergyPlus, but I also had this message:
Is it because I didn't fill the HVAC/Thermal zone Tab? Anyone who could help, please?
Ps: I am using OpenStudio 2.5 and EnergyPlus 2.13.
Thanks :)
EDIT: So I opened the *.err file to have details about the error, as suggested, and I had this message:
Program Version,EnergyPlus, Version 8.9.0-eba93e8e1b, YMD=2018.07.20 12:31,
* Severe * <root>[Construction][ASHRAE 189.1-2009 ExtRoof IEAD ClimateZone 1] - Missing required property 'outside_layer'.
* Severe * <root>[Material][Exterior door][specific_heat] - "0.100000" - Expected number greater than or equal to 100.000000
* Fatal * Errors occurred on processing input file. Preceding condition(s) cause termination.
...Summary of Errors that led to program termination: ..... Reference severe error count=2 ..... Last severe error=<root>[Material][Exterior door][specific_heat] - "0.100000" - Expected number greater than or equal to 100.000000
*** Warning: Node connection errors not checked - most system input has not been read (see previous warning).
*** Fatal error -- final processing. Program exited before simulations began. See previous error messages. strong text *** EnergyPlus Warmup Error Summary. During Warmup: 0 Warning; 0 Severe Errors. *** EnergyPlus Sizing Error Summary. During Sizing: 0 Warning; 0 Severe Errors. *** EnergyPlus Terminated--Fatal Error Detected. 0 Warning; 2 Severe Errors; Elapsed Time=00hr 00min 0.63sec
But I did not understand the third one (the Fatal one), So if anyone could help ?
Thanks again :)
OpenStudio 2.5 and EnergyPlus 2.13??? 2.5 should be based on EnergyPlus 8.9.0. Anyways, please open the "eplusout.err" to see what the actual error is, and post it here.
@Julien Marrec , I could not upload the text message in the comment here, so please find it above (I edited the question) Thanks :)
Looks like your construction doesn't have any materials in it. Drag and drop materials and/or constructions from the default library and use those in your default construction.
@mdahlhausen, indeed I had few surfaces without construction assigned, that I fixed afterwords, but I did not get the third error (Fatal): Errors occurred on processing input file. Preceding condition(s) cause termination. Do you know what does it mean ? And how can I fix it ? Thanks :)
To paste a snippet out of the eplusout.err, you can just copy and paste the text in your post, then use the "Code" functionality (CTRL+K, or click on the icon with "010101". That will indent the text by 4 space and display as a code block for readability.
Usually when a Fatal message is thrown, it is linked to a Severe error thrown before it. What do you get after you fixed the construction?
Thanks, When I fixed the construction, I had this :
Program Version,EnergyPlus, Version 8.9.0-eba93e8e1b, YMD=2018.07.24 11:26, ** Severe ** <root>[ZoneInfiltration:DesignFlowRate][189.1-2009 - LrgHotel - GuestRoom - CZ4-8 Infiltration 2] - Missing required property 'schedule_name'. ** Fatal ** Errors occurred on processing input file. Preceding condition(s) cause termination....Summary of Errors that led to program termination: ..... Reference severe error count=1 ..... Last severe error=<root>[ZoneInfiltration:DesignFlowRate][189.1-2009 - LrgHotel - GuestRoom - CZ4-8 Infiltration 2] - Missing required property 'schedule_name'. ************* Warning: Node connection errors not checked - most system input has not been read (see previous warning). ************* Fatal error -- final processing. Program exited before simulations began. See previous error messages.************* EnergyPlus Warmup Error Summary. During Warmup: 0 Warning; 0 Severe Errors. ************* EnergyPlus Sizing Error Summary. During Sizing: 0 Warning; 0 Severe Errors. ************* EnergyPlus Terminated--Fatal Error Detected. 0 Warning; 1 Severe Errors; Elapsed Time=00hr 00min 0.29secI guess I could also fix the first error about the infiltration, but I still don't know what do they mean by : Fatal ** Errors occurred on processing input file. Preceding condition(s) cause termination.
Like I said, the Fatal tells you there's something (reported before as a Severe) that it couldn't recover for. So fix that infiltration schedule missing and try again.
(feel free to post your eplusout.err by editing your original question instead of using the character-limited comment box)
Okay, Thanks a lot :)