Question about frit and its impact on building performance.

asked 2018-03-23 12:14:51 -0600

willyJohan
1540 ●1 ●5 ●10

updated 2018-03-25 12:17:51 -0600

I am trying to come up with a quick way to estimate how different levels of frit applied to glazing will impact a space. At this point all I am interested in is cooling load and annual energy use impacts. How wrong will it be to just use the simple glazing system inputs (U and SHGC) in EnergyPlus/OpenStudio? To put the question in another way, what, if any, are the impacts of adding frit to glazing other than reducing the SHGC?

edit retag flag offensive close merge delete

add a comment

2 Answers

Sort by » oldest newest most voted

answered 2018-03-23 12:54:24 -0600

rpg777
6980 ●6 ●15 http://openstudio.net/

That's a fine way to look at it, assuming you have valid U and SHGC values for your UGUs modified with added frit. You can derive these yourself using the Optics tool, but many glazing manufacturers will also have some listings for their products with and without frit for comparison.

edit flag offensive delete link

add a comment

answered 2018-10-03 09:42:42 -0600

kelsworth
31 ●3

FWIW, some manufacturers have published performance data for glazing products with the addition of frit at various densities. One helpful tool to study the influence of frit on SHGC is the Vitro Glass Constructor. You can construct single, double, and triple pane assemblies with the IGDB and prescribe frit patterns to certain company's products. For instance, the Vitro products offer many different frit densities whereas Interpane has none. Old Castle also offers reporting data for glazing products with three different densities and patterns for frit. From what I have seen, the overall contribution to SHGC depends on the substrate glazing but can range from 0.02-0.05 decrease in SHGC with 10% increase in white frit density. Intuitively, white frit will perform better for SHGC but I have not come across any grey frit performance data yet.