Hi All, Is there any way to convert IDF to XML or vice versa? I am looking for some computer code or some IDF post processing?
Thanks
Kindest Regards
Waseem
If you'd like to extend the conversion capabilities beyond what is freely available at http://eventstar.ornl.gov/trinity, you can download and make your contributions via GitHub:
I believe the Autotune project has a feature to do this:
http://energy.gov/eere/buildings/down...
http://evenstar.ornl.gov/trinity/
Dan
The Trinity testing website has this feature. If you ask, @JoshuaNew may give you the code for it. No promises.
The caveat is that the website only works for EnergyPlus 7.0. We'd need to run the *.idd for the EnergyPlus version you want through our conversion tool to *.xsd so you can have validated *.xml converted from the *.idd. What version of EnergyPlus are you using? I'd be glad to provide the code we have and post any conversion utilities that support newer EnergyPlus versions.
Dear All, Thanks for your reply. @JoshuaRNew I am using EnergyPlus 8.1, to be very precise version 8.1.0.009. Thanks again. Kindest Regards Waseem
Openstudio can convert idf to gbXML. There are quite a lot of XML so I dont know which one you want. But gbXML is the most common one for building model
Asked: 2015-01-12 12:15:47 -0600
Seen: 2,246 times
Last updated: Mar 18 '15
For broad questions like this, it might be useful to keep them open. Just because one answer was posted and accepted doesn't mean there might not be better ones in the future, that's one of the main benefits of these types of forums. I'm also surprised that OpenStudio isn't listed and an accepted answer.