How does ZONE EXHAUST FAN work?

asked 2016-04-19 07:05:04 -0600

JM
125 ●5

updated 2017-05-06 08:38:18 -0600

Hey, I am trying to model my building with only exhaust fans in each thermal zone. The supply air is provided through openings in the window frames. My building consists of one central ventilation unit which takes the the exhaust air out in each of the zones (50 zones in total). To do so, I am adding the ZONE EXHAUST FAN from the library to the zone equipment under the thermal zone tab. I have defined the fan efficiency, the maximum flow rate, the flow fraction schedule, and the balanced exhaust fraction schedule (always 1 since the supply air is provided by infiltration). But when I run the simulation now, I get no consumption for the fans.

So my question is now if I have to define an Air Loop under the HVAC system tab too? And if yes could you please tell me how to do this for this specific case! Thank you!

edit retag flag offensive close merge delete

add a comment

Comments

Thank you! However, I am not sure how I could check the E+ example file in OS. When I try to import the TermReheatZoneExh.idf file in OS the following warning shows up 'File is not valid to draft strictness'. I read in another forum that it is not possible to import e+ files made in an older version. I am using OS 1.10. Also, the user OS user guide states under 'Import and Export Options' that only the geometry, constructions, loads, thermal zones, and schedules can be imported. Not the HVAC systems. Could you please help me out here too?