Greetings everyone,
I would like to use the daily average site temperature as a sensor value in the energyplus EMS.
Though it can be output as a variable I am not being able to use it in the EMS. Any advice?
Best regards. Jevin
You can pick up a node temperature using the following sensor. However, this is the instantaneous outdoor temperature, not the daily average outdoor temperature.
EnergyManagementSystem:Sensor,
OATemperatureVariable, !- Name
OutdoorAirNodeName, !- Output:Variable or Output:Meter Index Key Name
System Node Temperature; !- Output:Variable or Output:Meter Name
You would have to create an average value yourself using other information from the simulation.
This example shows how to log a trend variable. The number of time steps to "save" in the history is based on the zone time step. If there is 1 time step per hour, the number of zone time steps to save is 24. If there are 6 timesteps per hour, the number of zone time steps to save is 144.
EnergyManagementSystem:TrendVariable,
OATemp, Name
OATemperatureVariable, !- EMS Variable Name
24; !- Number of Timesteps to be logged
Then in the EMS program average that trend over the number of time steps required to provide the daily average.
SET DailyAverageOATemp = @TrendAverage OATemp 24,
See the EMS example files for more information. Trend variables are exemplified in EMSDemandManager_LargeOffice.idf.
Thank you very much for the answer Sir.
The trend variable indeed sums up the previous 144 values but the issue is that the trend value at noon on the second day is the average of 72 values of the previous day and 72 values of the current day.
I am using an adaptive thermal comfort standard which is computed with the daily average temperature and I am trying to use EMS to automatically calculate the number of hours the zones fall our of the comfort range.
I don't think you can use future time data in your equation. You could calculate the daily average temperature and place those values in a Schedule:File. Then read that schedule and use the static daily average data in your EMS routine. See example file 5ZoneTDV.idf for use of the Schedule:File object and external csv file (in the C:\EnergyPlusV8-4-0\DataSets\TDV\ folder if you installed the default path).
The EMS trend variables can be used for this. See the input object called EnergyManagementSystem:TrendVariable and the trend variable function called @TrendAverage.
Thank you very much for the answer Sir. The trend variable indeed sums up the previous 144 values but the issue is that the trend value at noon on the second day is the average of 72 values of the previous day and 72 values of the current day. I am using an adaptive thermal comfort standard which is computed with the daily average temperature and I am trying to use EMS to automatically calculate the number of hours the zones fall our of the comfort range.
Asked: 2016-03-03 06:36:02 -0600
Seen: 1,088 times
Last updated: Mar 03 '16
