Simulation time step can not be changed

asked 2016-02-16 21:32:58 -0500

Dr. Fan
430 ●1 ●7

updated 2016-02-17 07:37:43 -0500

__AmirRoth__

4436 ●5 ●17 http://bleedinggreenna...

I just describe my problem of using energyplus below: I just generated a IDF profile by openstudio sketchup plugin and then input this IDF profile into Energyplus Launch for simulation. The problem is no matter what time step I changed in the IDF editor, the simulation results are always in hourly time interval. I quite appreciate anyone who can put a light on this issue.

answered 2016-02-17 00:51:26 -0500

Julien Marrec

29042 ●85 ●74 http://www.effibem.com/

You're probably talking about about Output:Variable.

Your output variables in your file are very likely set to report at the hourly level. Change the Reporting Frequency to Timestep or Detailed.

edit flag offensive delete link

Comments

Yes, you are right. The problem has been solve by your suggestion. I should set the frequency of report in the output variables as the same to the Timestep I set in the object tree. thank you very much.

Dr. Fan ( 2016-02-17 01:16:00 -0500 )edit

You're very welcome

Julien Marrec ( 2016-02-17 01:19:47 -0500 )edit

I am not able to get the data for timestep even after assigning the variables to timestep in output variables tab, I am getting the data for hourly formats even after selecting timestep .