 | 1 | initial version |
In my model, I have set the temperature schedules as 26℃. While in the simulation results, the indoor temperature seems to comply with the thermostat setpoint. But I don't think I've made such a setting. Because I used the VRF system and there's no thermostat at all.
For the heating scenario, there's also a thermostat setpoint and make the room temperature deviate from my design temperature.
In my model, I have set the temperature schedules as 26℃. While in the simulation results, the indoor temperature seems to comply with the thermostat setpoint. But I don't think I've made such a setting. Because I used the VRF system and there's no thermostat at all.
For the heating scenario, there's also a thermostat setpoint and make the room temperature deviate from my design temperature.
Looking forward to your help！
