Giorgio's profile - activity

Yes basically yes, image an extractor fan in a toilet without windows and connections with external walls, the air shoul

Air extraction in wet rooms Hello, in many buildings with natural ventilation is present an extraction fan in bathrooms,

Yes that's exactly the solution I was speaking about, I'll follow your suggestion, thank you!

Hi, thanks for the answer but I'm referring to a different type of heating system

I need to model a flat with electric storage heaters for space heating, is it possible to do it in E+?

Is it possible to simulate electric storage heaters in Energy+? I need to model a flat with electric storage heaters for

I had to manually add the variable in the idf because was not present. After that yes, it is possible to extract the val

Whole building electric consumption from FMU Hi, I'm trying to extract the signal of the electric consumption for the en

Hi Justin, the problem was in the node definition for the setpoint manager. Now the FMU is working and responding to all

Hi, I want to cosimulate E+ in Dymola, basically I want to model the energy system (GSHP PV etc...) in Dymola and use the FMU to simulate the flats. To do this I need to send the temperature and the mass flow of the water coming from the GSHP in Dymola to the FMU as an input, in other words the temperature of water in node after the HP in E+ must be defined with Dymola. I'm trying to use the actuator but I can only modify the setpoint, what I have to do to modify a variable in E+ with a signal from Dymola?

Hope that someone can help.

Regards Giorgio

Hi Justin, thank you very much for the answer, I did as you suggested and the I have the FMU with the two interfaces. I

FMU Dymola variable input Hi, I want to cosimulate E+ in Dymola, basically I want to model the energy system (GSHP PV et