DPalma's profile - activity

I also think it could be an option. Although I am concerned about the heat exchange between the warm outside air and the

Thank you for your answer. Do you think there might be a way to simplify the system? Maybe use Coil:heating/cooling:DX a

Hi!

I'm modelling an AHU (Air Handling Unit) which has a system called "heat pipe" as you can see in the picture below.

C:\fakepath\Esquema clima .png

I've been looking for information on how to model this type of system but haven't found anything. Any ideas?

I've seen that in EnergyPlus there is the object: CoilSystem:CoolingWater:HeatExchangerAssiste, which works similarly but i haven't found it in OpenStudio.

Thanks :)

Heat pipe system OpenStudio Hi! I'm modelling an AHU (Air Handling Unit) which has a system called "heat pipe" as you c

Are you ussing schedules for ventilation? I recently also had to compare a HAP model with an EP model and I realized tha

Hi showowit, Thank you for your response. I'm going to provide some more context: I need to demonstrate with my energy

However, in the table, it shows 23 kW. So, I suspect that I also need to use the outputs indicated in the documentation

To do this, I am using the output:variable "Zone Ideal Loads Zone Sensible Heating Rate." The maximum value for the enti

Hi showowit, Thank you for your response. I'm going to provide some more context: I need to demonstrate with my energy

Sensible Heat Gain Summary Hourly Hi All, I'm conducting a study on the heating and cooling demand of a building, and I

Sensible Heat Gain Summary Hourly Hi All, I'm conducting a study on the heating and cooling demand of a building, and I

Natural and artificial lighting [lux] Hi! I'm working on an outdoor lighting project. Previously, I've worked on other

Hi Merve, Check this: https://unmethours.com/question/76433/how-to-obtain-hourly-mean-air-temperature/#76488 It's impo

If you're sure you have defined the output variables correctly in jEplus I can't help you. I'm still learning how to us

Have you configured: "algorithm settings" to do the sensitivity analysis?

Hi Julgam, Are you using jEPlus+EA? I've been simulated this days and I've had a similar problem (I think). If you ge

Hi! I had the same problem a few weeks ago. -Result Collection -RVIs (New object) -Edit RVIs and write: eplusout.eso e

I have a system that produces hot water with a heat pump. Now I want to add a hot water tank to soften the peaks in demand.

I'm using: WaterHeater:Mixed with 0W but I don't understand the difference between "Use side inlet node name" and "Source side inlet node name".

Hi!,

I'm simulating a building that uses an air-water heat-pump to produce hot water. The Fan-coil and UTAs use hot water but is impossible to associate my heat pump with these systems.

The solution I have found is to use a boiler with efficiency 1 and calculate the real consumption using the COP of the heat pump.

The problem is that I need use Jeplus to calibrate the COP but its not an input variable.

Is there a way to define a hot water production system to which I can introduce the COP of my heat pump?

Thank you!

WaterHeater:Mixed as a hot water storage I have a system that produces hot water with a heat pump. Now I want to add a h

HeatPump:PlantLoop:EIR:Heating I have an air-water heat pump. Produces hot water at a maximum temperature of 50ºC. In "

HeatPump:PlantLoop:EIR:Heating I have an air-water heat pump. Produces hot water at a maximum temperature of 50ºC. In "

I have the same probem. I´m working with a boiler and I want to replace it with an air-water heat pump. I´m using HeatP

Air-Water heat pump in EnergyPlus? Hi!, I'm simulating a building that uses an air-water heat-pump to produce hot water