First time here? Check out the Help page!
2023-04-13 14:42:05 -0500 | received badge | ● Popular Question (source) |
2019-03-07 11:44:18 -0500 | marked best answer | Has anyone validated the DOE Reference Building Measure? I used the OpenStudio measure "Create DOE Prototype Building" for a medium and large office buildings, but found that the site EUIs vary widely from the EUI summary table on DOE's website. Specifically, I ran both buildings for the 90.1-2013 standard and 4A climate zone without any further modifications and got a 35% lower EUI for the medium office building and 240% higher EUI for the large office building, compared to the DOE summary table EUIs. Has anyone else come across this issue? Are there any best-practice suggestions for using this measure to avoid such an issue? Has this measure been validated or is it still under active development? |
2019-03-07 07:47:19 -0500 | asked a question | Has anyone validated the DOE Reference Building Measure? Has anyone validated the DOE Reference Building Measure? I used the OpenStudio measure "Create DOE Prototype Building" f |
2018-12-28 08:41:19 -0500 | marked best answer | Does geomeppy have the eppy rename functionality? In eppy 0.5.44 documentation there is a description of the "modeleditor.rename(idf, key, oldname, newname)" functionality for applying a new name across the entire idf. I was not able to find anything about the same functionality in the geomeppy documentation. Does anyone know if it is there, why it would not be there, or have an alternative approach to renaming objects? |
2018-12-28 08:41:18 -0500 | received badge | ● Supporter (source) |
2018-12-19 09:36:12 -0500 | asked a question | Does geomeppy have the eppy rename functionality? Does geomeppy have the eppy rename functionality? In eppy 0.5.44 documentation there is a description of the "modeledito |
2018-08-25 05:53:14 -0500 | received badge | ● Teacher (source) |
2018-08-21 08:12:15 -0500 | commented answer | Energyplus 8.9 crashes after using updated 8.8 idf file This was the beginning of the error log, no description of the fatal error, which was strange/not helpful. I figured it |
2018-08-21 08:12:05 -0500 | commented answer | Energyplus 8.9 crashes after using updated 8.8 idf file This was the beginning of the error log, no description of the fatal error, which was strange/not helpful. I figured it |
2018-08-21 08:11:08 -0500 | commented answer | Energyplus 8.9 crashes after using updated 8.8 idf file This was the beginning of the error log, no description of the fatal error, which was strange/not helpful. I figured it |
2018-08-20 15:32:14 -0500 | commented answer | Energyplus 8.9 crashes after using updated 8.8 idf file This solved my crash issue but now I am dealing with fatal error message of limited information: *** Warning: Node con |
2018-08-20 15:25:38 -0500 | marked best answer | Energyplus 8.9 crashes after using updated 8.8 idf file I have an idf file I created and used in energyplus 8.8 but when I switched to 8.9 and updated the 8.8 idf file the simulation just crashes. Normally I would have the error file to work with to fix my idf file but this crash leaves me little clue as to what is wrong. I tried running the 8.8 idf file in EP8.8 again and it works there, with no errors. I compared the 8.8 and 8.9 idf files in the idf editor and there are no differences, meaning the update of the file seems ok. I suppose the new EP does not like something about my idf setup which was previously fine. I ran the simulation with the "pause" function and at the end of the simulation I get this: C:\Users...\EPTEMP-00000001>IF NOT EXIST eplusmtr.inp "C:\EnergyPlusV8-9-0\postprocess\ReadVarsESO.exe" test.mvi ReadVarsESO program starting. EOF encountered during read of ESO header records probable EnergyPlus error condition -- check eplusout.err ReadVarsESO program terminated. ReadVars Run Time=00hr 00min 0.03sec C:\Users...\skpV2\EPTEMP-00000001>"C:\EnergyPlusV8-9-0\postprocess\HVAC-Diagram.exe"
Started HVAC Diagram
ERROR: ReadBND, Did not recognize: Controlled Zone Return,1,THERMAL ZONE 1,THERMAL ZONE 1 RETURN OUTLET What could the problem be? |
2018-08-20 15:25:38 -0500 | received badge | ● Scholar (source) |
2018-08-16 17:33:04 -0500 | received badge | ● Student (source) |
2018-08-16 16:33:07 -0500 | commented question | Energyplus 8.9 crashes after using updated 8.8 idf file I did run version translation in E+ and reinstalled 8.9, still the same issue. I did not see anything related in the rel |
2018-08-16 13:48:05 -0500 | answered a question | external insulation Yes, if there are internal heat sources (e.g. people, lights, equipment) and you increase the insulation then you are tr |
2018-08-16 13:48:05 -0500 | asked a question | Energyplus 8.9 crashes after using updated 8.8 idf file Energyplus 8.9 crashes after using updated 8.8 idf file I have an idf file I created and used in energyplus 8.8 but when |