josepsolebonet@telefonica.net's profile - activity

Watt is a power unit Joules is energy unit Watts.-hour is also one energy unit

I use these two variables (my shading control is “OnIfHighSolarOnWindows”) Surface Outside Face Incident Solar radiatio

I use these two variables (my shading control is “OnIfHighSolarOnWindows”) Surface Outside Face Incident Solar radiation

I’ve written some measures to use different methods for heat ground transmission Cambiar temperature del terreno Cerra

I’ve written some measures to use different methods for heat ground transmission Cambiar temperature del terreno Cerram

See on BCL "RenameSpaceSurfacesBasedonParentSpaceandOrientation"

I wrote an E+ mesure to introduce an Earth Tube (pozo canadiense in Spanish) from OpenStudio using it is not necessary t

I wrote an E+ mesure to introduce an Herth Tube (pozo canadiense in Spanish) from OpenStudio using it is not necessary t

I’ve always the same warnings “Always On.. Off..” even if these schedules are not introduced but the models run perfectl

Zone Air Contaminant Balance in OSapp In OpenStudio Application v 1.4 if in Simulation settings / Zone air contaminant b

Importin idf and ifc files More and more many software tools are able to produce IDF or IFC files but there is no way (o

In my opinion you shall report the CO2 concentration at hourly interval and then using excel you can easily identify whe

Source position in Internal Source Construction Apparently in OS when a new Internal Source construction is added it ass

Source position in Internal Source Construction Apparently in OS when a new Internal Source construction is added it ass

Source position in Internal Source Construction Apparently in OS when a new Internal Source construction is added it ass

It’s also possible to run multiple weather files using Jeplus software

It seems there is a space below the roof and probably some insulation exists between the roof and the conditioned spaces

It seems there is a space below the roof and probably some insulation exists between the roof and the conditioned spaces

In each of your simulation you need to modify the construction introducing the variable material It’s possible to do it

Yes. You only need to assign for each Surface the appropriate construction.

According to my calculations there is no difference if you don’t modify View factor to ground to 0.1 and Convective coe

In my opinion "door" surfaces are neglected in this measure

Insulation on the clading is not efective Vented cavity bypass the insulation product

I never reached to modify directly the text file. ¿can you explain better how to do it? I agree the west way is to defin

Unfortunately the proposed procedure only works if the colour is already different and it’s not possible to change the c

Other possibilty is create an idf file with ground temperatures and use the Inject idf measure.

The sql file already exists and can be viewed using Resultsviewer but not (or at minium I don't know how) using Dview

Under Openstudio 2.2 the iluminance map can be viewed using the Resultsviewer application it is not the case using DView

Illuminance maps Under OpenStudio 2.3 I'm not abale to obtain the results for iluminance maps

Try to open eplainch go to browse and select the file insteated to double clik on the file

Tru to open eplainch go to browse and select the file insteated to double clik on the file

As far as I know the only way is to use "External natural vented cavity" objects You need to modify the idf file manually (or perhaps if you are able to produce a measure to do it)

Yes but in this case you can not créate or delete compact schedules Clearlly Version 1.10 is worse than 1.9!!

In OS 1.10 the render by constructions doesn’t work. It was helpful to verify the layers on each construction selecting the surface and using the object inspector. How can I use this feature?

This issue is already posted. See:

Boiler and baseboard system [closed] and The Plant equipment control scheme error and probablly other ones?

I’m very disappointed regarding this lost functionality. At every new release we lose something. In version 1.9 was the plant equipment operation scheme In version 1.10 materials / constructions and Schedules are not anymore editable Be hope in version 1.11 these functions will reappear

I can not see any material neither construction in inspector option in sketchup pluguin Is it normal?

I’ve found the same problem with Boiler/baseboard system

I’ve found the same problem with Boiler/baseboard system

I’ve found the same problem with Boiler/baseboard system