Tim's profile - activity

Metering Ideal Air Loads in EnergyPlus Hi all, is it possible to channel "Zone Ideal Loads Supply Air Total Cooling Ener

I noticed that with the Chicago weather that is the default in EPLaunch the simulation runs without error. But using a B

I noticed that with the Chicago weather that is the default in EPLaunch the simulation runs without error. But using a B

I used this installer https://github.com/NREL/EnergyPlus/releases/download/v9.4.0/EnergyPlus-9.4.0-998c4b761e-Windows-x8

Hi Neal - any update regarding this issue above? Can you reproduce the error on Windows?

Hi Neal - I followed your suggestion and removed the dl controls and I am still getting the same error. Here are the fil

@neal - out of curiosity - is there a good way to output diagnostic info from KIVA in E+. I .e. pngs of the 2d FE sectio

@neal-kruis thanks that's an interesting find. The model I sent was just a stripped-down example. Does this memory leak

just leaving the Wall Height Above Grade and Wall Depth Below Slab in the Foundation:KIVA object does not work for me. G

I tried without (then KIVA should use defaults) and I tried with the provided settings from the example.

Thanks for your reply, Neal. Maybe I am missing something in my setup. I am attaching my IDF file here: https://www.drop

Thanks for your reply, Neal. Maybe I am missing something in my setup. I am attaching my IDF file here: https://www.drop

EnergyPlus KIVA error Hi - following the walkout basement example for KIVA provided with EnergyPlus I am getting the fol

EnergyPlus KIVA error Hi - following the walkout basement example for KIVA provided with EnergyPlus I am getting the fol

Autosizing warning I am getting a warning message when auto-sizing a simple IdealAir systems in EnergyPlus that I don't

Autosizing warning I am getting a warning message when auto-sizing a simple IdealAir systems in EnergyPlus that I don't

This is an old thread but one might still find this useful. You can couple EnergyPlus AFN simulations and CFD with Clima

Well - at least the fan energy would be important if one wants to talk about EUI and differences between mech vent with

Hi - is it possible model fan energy and the associated heat pick up with the zonehvac:IdealLoadsAirSystem?

For early design modeling purposes the IdealLoadsAirSystem is very nice as it is simple to set up and can model heat recovery and economizers. The only thing missing is a good way to approximate fan energy with the mechanical ventilation rates of the system.

Well - at least the fan energy would be important if one wants to talk about EUI and differences between mech vent with

Fan energy with Zonehvac:IdealLoadsAirSystem in EnergyPlus Hi - is it possible model fan energy and the associated heat

Fan energy with Zonehvac:IdealLoadsAirSystem in EnergyPlus Hi - is it possible model fan energy and the associated heat

However, I do have two followup questions: 1) You state "a full year of data" must be present. Does this mean it has to

Thanks a lot for the answer Michael. This clarifies a lot. The "This file contains external shading fractions for all sh

Thanks a lot for the answer Michael. This clarifies a lot. The "This file contains external shading fractions for all sh

EP9.0.1 crashes when external shading is imported from file Energy Plus v 9.0.1 crashes when loading shading from an ext

How to use the epJson Schema with C# . Net I would like to generate classes from the epJSON schema to use in a C# propgr

How to use the epJson Schema with C# . Net I would like to generate classes from the epJSON schema to use in a C# propgr

how to define PCM enthalpy curves Hi all, PCM manufacturers often provide the following technical data on their products