Melina's profile - activity

Thank you very much

Oh perfect. I think I should be able to convert my idf file. I'll try thanks

Please find them using this link. You are right I didn't try any other weather files and when I did the tool didn't cras

Sorry for my incomplete explanation. I mean when I set "foundation" as the boundary condition for my under-grade walls (

Thank you very much for your time. Regarding M1 I fixed that missing wall in E+ (I have 27 surfaces in E+). I think it w

Hello. Thank you for your great help. I just realized that I cannot use Kiva for my underground Basement walls as E+ doe

https://1drv.ms/u/s!AnW9Bg_LTjtEbcVYxt9ywGYBeFc?e=If0xPL

https://1drv.ms/u/s!AnW9Bg_LTjtEajA4ChTuR9pSJHA?e=vTcfIx

I would be grateful if you could take a look. How can I share the idf?

The Zone is not fully enclosed Hello. I keep receiving this warning below and the same subject I found on Unmethours did

Thank you so much!

My concern is that this 18 degrees value is still being used in the heat transfer calculations for the energy balance of

I changed them to the foundation boundary condition and I realized that the Ground temperature is still 18C but this tim

Actually, I realized it before seeing your answer and changed the boundary condition to the foundation. Then I received

Thank you for answering very quickly. I'm not sure this is happening to me. Maybe something is missing from my model or

Thank you for answering very quickly. I'm not sure this is happening to me. Maybe something is missing from my model or

Ground temperature in energy plus Hello. I want to ask if the 18C (default value in energy plus) for ground temperature

Unfortunately, it doesn't give me any error or related warning.

Also, I'm using zone capacitance multiplier. I saw in my previous simulations that this parameter can even cause errors

I made a new IDF, this time very simple. I used "HVAC template:packaged VAV" but the problem here is that for choosing t

Thank you for your answer and sorry for my late follow-up. I have a blow-through supply fan and I did whatever you said

controlling a two zone house with VAV and Unitary system Hello. I have a two-storey residential building, and because of

Controlling 2 zones by VAV system and EnergyPlus AirLoopHVAC:UnitarySystem: "SetPoint" Hello. I have a two-storey reside

Thank you very much for your time and help.

Thank you very much for your help. Just a quick question. I have to do this in energy plus 9.3.0 but instead of the sour

Zone Infiltration Mass Flow Rate of the building Hello. I want to plot the hourly Zone Infiltration Mass Flow Rate of t

does anybody have an idea about this?

Control the Slave zone in Energy plus Hi everyone. I'm controlling the temperature of my slave zone in EMS (EnergyPlus)

Hello. Today I faced this same problem! what should I do? I sent an email as the error is saying but not my input file.

Control the Slave zone in Energy plus Hi everyone. I'm controlling the temperature of my slave zone in EMS (EnergyPlus)

Hello again. For getting the control of a zone (slave zone when the master zone is vacant) by EMS what is the best actua

thank you very much for your help. The zone capacitance multiplier did work! and now the mean air temp. of each zone se

Sudden Increase or Decrease in indoor air temperature in energyplus Hi everyone. I have a residential building in Energy

Thank you very much! my problem is solved!

Thank you very much. I did that and now I have a very simple problem! I've written a simple program with if and it says

Thank you but I have 2 zones, How can I define which Zone's occupancy I need in the sensor? Can I use the zone's name in

Switching the master and slave zones Hi everyone. I have 2 zones in a building and my HVAC system is all air. I have def

Thank you very much for your explanation. I think maybe I should try using OpenStudio

I found this on bigladder website and my problem is solved: Zone Heating Setpoint Not Met While Occupied Time: Hours wh

Thank you very much for your responses. Actually, I'm not using OpenStudio right now (maybe I have to in the future) I'm

Downloading ResStock Hi everyone. I need to use ResStock software but I didn't succeed to download it. Is it open-source

thermal discomfort Hello to everyone I've simulated a residential building in EnergyPlus and my zone control is dual set

Thank you so much for your comment. I forgot to define it and now I can see the tables!