Aly ElHefny's profile - activity

Hey Debayan, For the location, I'm using the exact station location for the both cases. I understand that TMY presents a

For the location, I'm using the exact station location for the both cases. I understand that TMY presents averaging valu

I believe this discussion covers part of your question : Air to air rotary exchanger rpm

Solar Irradiance [TMY vs Actual data] Hello everyone, I hope you are in good health. The following plot presents the gl

Thank you so much for the useful information. Yes saving 3-5 seconds would result in major time savings for the scale I'

ReadVarsEso message Hello everyone, I hope you are all in good health. Currently, I don't have any reported items unde

ReadVarsEso message Hello everyone, I hope you are all in good health. Currently, I don't have any reported items unde

ReadVarsEso message Hello everyone, I hope you are all in good health. Currently, I don't have any inputs under "Outpu

ReadVarsEso message Hello everyone, I hope you are all in good health. Currently, I don't have any inputs under "Outpu

Hello Bonnema and Aaron, thanks for your helpful replies. All the alternatives look very helpful. That would enable me t

Hello Bonnema and Aaron, thanks for your helpful replies. Option 2 looks the best. That would enable me test the current

Hello everyone, I hope you are all doing well.

Is there a way to have the TMY file run a custom solar trajectory ? Or I have to construct a custom weather file and include all inputs (Not TMY) ?

Declaring a specific solar profile within TMY file Hello everyone, I hope you are all doing well. Is there a way to hav

Declaring a specific solar profile within TMY file Hello everyone, I hope you are all doing well. Is there a way to hav

Declaring a specific solar profile within TMY file Hello everyone, I hope you are all doing well. Is there a way to hav

No I'm using ideal model for only one case of the two. But even comparing the sensible loads has difference.

To have the energy consumed in reheat you simply add the energy consumed by all the reheat coils. Reheat does not mean t

Hello Aaron, I hope you are well. For the prototype building I'm reporting the variable: Cooling Coil Total Cooling Rate

Hello Aaron, I hope you are well. For the prototype building I'm reporting the variable: Cooling Coil Total Cooling Rate

Ideal load air system returning low load values Hello everyone, I hope you are all in good health. I'm using ideal load

Ideal load air system returning low load values Hello everyone, I hope you are all in good health. I'm using load air s

You can generate output for your reheat coil similar to any heating coil, for example: Heating Coil Electric Energy , He

To view the temperatures at the inlet and outlet of the cooling coil you can output the variable: "System Node Mass Flow

Hello Everyone, I hope you are all doing well and safe.

I'm trying to create an epw file out of real data to be used in an energyplus simulation. I have pasted my one year hour by hour outdoor air and solar data into the "Elements" tool and generated an epw file. I've also adjusted the location related inputs in Elements. To validate that, I have then used the file to run a simulation and output the outdoor conditions. They don't match, for example here is the site outdoor air temperature compared with my raw data.

I would appreciate it if I can get some hints on that procedure. Thanks in advance

Weather file, cannot find the first day Hello everyone, I hope you are all doing well. I'm facing the following error,

Weather file, cannot find the first day Hello everyone, I hope you are all doing well. I'm facing the following error,

Question about load in residential building Hello everyone, I hope you are all in good health. I have a simple question

Question about load in residential building Hello everyone, I hope you are all in good health. I have a simple question

Question about load in residential building Hello everyone, I hope you are all in good health. I have a simple question

Hello Lawrie, I'm happy to know that you are in good health. Yes, I believe that's exactly what is happening , and my qu

So I think the problem is that the code just stops early when searching for the start day. And that's why it runs ok whe

Hello Linda Lawrie, I'm happy to know that you are in good health. Yes, I believe that's exactly what is happening , and

Hello Aaron, I hope you are well. This load is in the prototypical single family residential building model. The simulat

Hello Aaron, I hope you are well. This load is in the prototypical single family residential building model. The simulat

Weather file, cannot find the first day Hello everyone, I hope you are all doing well. I'm facing the following error,

Question about load in residential building Hello everyone, I hope you are all in good health. I have a simple question

Weather file, cannot find the first day Hello everyone, I hope you are all doing well. I'm facing the following error,

@Jason DeGraw It seems that the code is giving up early on finding the start day since it runs ok at January and Februar

@Jason DeGraw It seems that the code is giving up early on finding the start day since it runs ok at January and Februar

Weather file, cannot find the first day Hello everyone, I hope you are all doing well. I'm facing the following error,

Weather file, cannot find the first day Hello everyone, I hope you are all doing well. I'm facing the following error,

Hello Jason DeGraw and kwalkerman, I have turned all the weather indicators of RunControl to no and the problem is still

Hello Jason DeGraw and kwalkerman, I have turned all the weather indicators of RunControl to no and the problem is still

Hello Jason DeGraw and kwalkerman, I have turned all the weather indicators of RunControl to no and the problem is still

The problem seems to happen when simulating multiple fmus wrapped including the custom minute weather file (simulating m

Hello Jason DeGraw and kwalkerman, I have turned all the weather indicators of RunControl to no and the problem is still

Hello Jason DeGraw and kwalkerman, I have turned all the weather indicators of RunControl to no and the problem is still