Sriraj's profile - activity

In spite of the warning it appears that the program is calculating the right wind pressure coefficients. Output results

Thank you for your suggestion. I will submit it there with a single zone simple input file.

There is no problem when I tried using "Input". However, the problem still persists with "SurfaceAverageCalculation".

hi Jason, Thank you for your suggestion. I have checked the AirflowNetworkBalanceManager. It appears from the calculati

AirflowNetwork model error in EnergyPlus Dear Users, I am encountering the following warning message while modelling Ai

Thank you very much for reply Richard. That pretty much solved the issue and moreover reminded me of an important element that I often tend to overlook.

best regards, Sriraj

As per the energyplus I/O reference, the output variable 'Availability Manager Hybrid Ventilation Control Status' reports three integer values: 0,1, and 2 denoting no hybrid ventilation control, whether natural ventilation is allowed, or not. However, the output result from a simulation shows the values range between 1 and 2 (1.1,1.858796296, 1.758333333, 1.716666667 etc.). Does it mean that there is a partial natural ventilation happening or denotes that there is a potential to naturally ventilate? I believe this should not be the case, as the output results has to just show a binary result in either 1 or 2. Could somebody please explain how this has to be understood? Thank you very much in advance.