Yunyang Ye's profile - activity

Here is the guidance for the new measure. I do not think that the measure is in BCL yet. You probably need to follow the

Here is the new measure: https://pnnl.github.io/BEM-for-PRM/get_start/os_app/install_measure/

@mattkoch. Yes. The baseline building should follow the requirements in 90.1 Appendix G. In FY22, our scope is to work o

@mattkoch Yes. I suggest you using 90.1-2019 and then, doing some minor modifications to switch to 90.1-2016. When you c

@mattkoch For now (FY22 goal), we will not automate the 90.1-2016 PRM. We might give a summary of the differences betwee

@wassimj There are several measures, which are able to generate building models (osm files). Please see https://www.ener

@mattkoch You have the flexibility to create your own space types by following the requirements in 90.1 Appendix G. By t

The warning messages show that the issue is because of the missing standardSpaceType and standardBuildingType values. Th

We target October 2022 to add the 90.1-2019 Appendix G PRM measure to OpenStudio.

I did some tests for this and I doubt that it is caused by the EnergyPlus version. After I upgraded the idf files into E

Hello Ammar. The OpenStudio measure, Create DOE Prototype Building, does not include climate zone 0 so far, but we have

The measure, "Create Baseline Building", currently only supports creating 90.1-2013 baseline models following its App G

There is not an openstudio version's residential building model (ASHRAE 90.2). The link provides EnergyPlus version. It

The prototype building models for midrise apartment were developed based on the requirements in ASHRAE 90.1 (Energy Stan

Yes. You can use the prototype building models in other locations by using the different locations.

In OpenStudio GUI, did you go to "Components & Measures" -> "Find Measures" and download the measure you need? Af

You need to modify the schedule for HVAC Operation (HVACOperationSchd) as well as the heating and cooling setpoint tempe

Thanks Aaron. I will contact with you through email.

I want to see the geometry for the EnergyPlus model (Version 9.3). However, it seems that there is not a compatible SketchUp plugin version to let me do so. Is there any way to see the geometry for the E+ V9.3 model? Thanks.

Thanks Dan! I will try it.

How to see the geometry for the E+ V9.3 model? I want to see the geometry for the EnergyPlus model (Version 9.3). Howeve

I used the model created in Openstudio 1.12.0, and re-ran it in Openstudio 2.0.0. Then I put it into PAT and added measures which were also worked in old version (1.12.0). However, when I ran locally, it always told me "Server Error". Could someone tell me why the problem was caused and how to solve it? Thanks.

Thanks a lot. Your update helps me a lot.

Thanks for your update.

Thanks. Andrew.

I test the branches LargeOfficeDetail and MediumOfficeDetail in openstudio-standards gem. It seems that the new medium office model is not in the branch. The large office cannot be run sucessfully. Does anyone know whether the new models have ready or not? The error to run large office detailed is shown below.

Office with Detailed geometry in os-standards gem I test the branches LargeOfficeDetail and MediumOfficeDetail in openst

You can use different thermal zones in one physical room. What you need to do is to add air walls for each zones.

You need to include the measure, OpenStudio results for all the samples. Then you can see the results.

I plan to create a Dual-branch air-handling unit (attached) for building energy model. As we know, there are some restricts of the node settings in the HVAC system by using EnergyPlus or OpenStudio. Whether there are some methods like using EMS to create the system?