Tokarzewski's profile - activity

The DesignBuilder is not looking at this property, it always assumes that the coordinate system is World. Yes, the valu

I was able to download the idf file this time. I wrote an answer below.

DesignBuilder IDF import functionality currently does not support the relative coordinate system and your IDF model is u

Unfortunately, I can't download the file from the link. Can you try https://wetransfer.com/?

I need to test the CPU core temperatures. Maybe it is throttling, so the CPU driver lowers the frequency and voltage to

EnergyPlus simulation runtime - CPU performance Hi, I have difficulty finding the root cause and resolving the followin

EnergyPlus simulation runtime - CPU performance Hi, I have difficulty finding the root cause and resolving the followin

Hello Sheida, Can you please share the .idf and .osm files so I can take a look and help you? I suspect the building m

From what I know the issue was not fixed yet, so I don't understand why you say it is fixed in 22.1. Can you please prov

No, I don't. I have never found a need to produce an epw file with 15 min intervals. The EnergyPlus engine interpolates

Do you have 15min epw when you run a simulation with 4 timesteps? There is no need to produce epw file with 1 min interv

Hi Grainne, If a stat is not available you should enter the information on the Statistics tab by hand. The stat file is

The Meter:Custom can't contain other Meter:Custom but interestingly the Meter:CustomDecrement can contain Meter:Custom

Hello .dsb is the model file format which can be opened only in the DesignBuilder application. .eso, .epw, .htm, .drs

Hello, did you try the solutions from this website? https://support.designbuilder.co.uk/index.php?/Knowledgebase/List/In

Try assigning the variable types again and verify that the target objects were defined. If this won't resolve the issue

Hello .dsb is the model file format which can be opened only in the DesignBuilder application. .eso, .epw, .htm, .drs a

Hello, did you try the solutions from this website? https://support.designbuilder.co.uk/index.php?/Knowledgebase/List/In

Hello, I think you are looking for the AFN Linkage Node Volume Flow Rates. DesignBuilder will generate the necessary ou

DesignBuilder API can be accessed through Python scripting inside the DesignBuilder application. There are several exam

DesignBuilder API can't be accessed through Python, currently, DB API can only be accessed through C#. DesignBuilder has

aparker, the link inside the "This measure" does not seem to work :/ {"detail":"Not Found"} How can I access this meas

It's even more twisted. Someone was exporting the gbXML from DesignBuilder to Ladybug tools and it uses OS SDK. Why? Fro

It's even more twisted. Someone was exporting the gbXML from DesignBuilder to Ladybug tools and it uses OS SDK. Why? Fro

gbXML - Ground boundary condition on a roof? I got a simple model, one zone with a hole in the roof in DesignBuilder. I

gbXML - Ground boundary condition on a roof? I got a simple model, one zone with a hole in the roof in DesignBuilder. I

Hi all,

Is it possible to model two underground zones -1 and -2 levels with Kiva?

I got the severe error which says I should add reference the kiva foundation to the internal floor which is also a ceiling for the zone -2 so I don't want to give it a foundation boundary condition.

* Severe * Surface="PIWNICA:ZONE2_WALL_2_0_0" has a 'Foundation' Outside Boundary Condition * ~~~ * referencing Foundation:Kiva="DEFAULT KIVA FOUNDATION_PIWNICA1:ZONE2_GROUNDFLOOR_0_0_0". * ~~~ * You must also reference Foundation:Kiva="DEFAULT KIVA FOUNDATION_PIWNICA1:ZONE2_GROUNDFLOOR_0_0_0" * ~~~ * in a floor surface within the same Zone="PIWNICA:ZONE2".

Hi, The internal door and other internal constructions are reversed to avoid the issue that is explained here. https://

Two underground zones on top of each other with Kiva Hi all, Is it possible to model two underground zones -1 and -2 le

Two underground zones on top of each other with Kiva Hi all, Is it possible to model two underground zones -1 and -2 le

Two underground zones on top of each other with Kiva Hi all, Is it possible to model two underground zones -1 and -2 le

Hi Marco, A similar question was asked in another post how-to-pid-control-a-cooling-coil-in-designbuilder.

Did you try Modelica with Buildings library? https://simulationresearch.lbl.gov/modelica/

Hi Giacomo90, I think you will be able to find more information about Ladybug tools on their forum https://discourse.la

Though, I can't run the python plugin without specifying search paths. I have "Add Current Working Directory to Search P