student's profile - activity

I also uploaded a picture of the most important info about water in the Evap cooler.

@wjsjch would you be able to send a screenshot of the flow you get in Var Spd Pump (your 0.00135m3/s) to sebastien.devri

@wjsjch would you be able to send a screenshot of the flow you get in Var Spd Pump (your 0.00135m3/s) to sebastien.devri

I understand what you say, but what we have is an zero flow in the source loop the entire year. There is well flow in th

@JKavanaugh I understand what you are saying but how can it be possible that the source loop with ground heatexchanger h

little remark if you don't make separate loops you will need to take the right setpoint manager. Because a scheduled set

no, we have 3 loops. 1 source loop and one cooling and one heating loop. I will upload my file so you can see what we di

no, we have 3 loops. 1 source loop and one cooling and one heating loop. I will upload my file so you can see what we di

We also made a model with a ground heatexchanger. It is best that you create to separated loops one for heating and one

We also made a model with a ground heatexchanger. It is best that you create to separated loops one for heating and one

@Aaron Boranian Yes this is the object out of the BCL.

add zone mixing object Hello, I am a student working in OS (3.1.0) modelling a residential building. To have an balanced

add zone mixing object Hello, I am a student working in OS (3.1.0) modelling a residential building. To have an balanced

fluid to fluid heat exchanger Hello I am a thesis student working in OS 3.1.0. We have by comparing the fluid heat excha

fluid to fluid heat exchanger Hello I am a thesis student working in OS 3.1.0. We have by comparing the fluid heat excha

fluid to fluid heat exchanger Hello I am a thesis student working in OS 3.1.0. We have by comparing the fluid heat excha

fluid to fluid heat exchanger Hello I am a thesis student working in OS 3.1.0 and we have by comparing the fluid heat ex

ground heatexchanger I am a master student working with openstudio 2.7.0. I have some weird results in my loop with the

Floor cooling water temperture to hot and condensation I am a Master student checking the robustness of a building with

cooling loop to hot with heat exchanger fluid to fluid I am a student working on my thesis, I must evaluated the robustn

cooling loop to hot with heat exchanger fluid to fluid I am a student working on my thesis, I must evaluated the robustn

water loops to hot or to cold I am a student working on my thesis, I must evaluated the robustness of a building with OS

@julien Marrec, I have made a design specification outdoor air object with all values zero does this gave the same resul

julien, I have hard sized the minimum and maximum outdoor air Flow rate but still get the warnings and severe error. Wha

@julien Marrec, I have hard sized the minimum and maximum outdoor air Flow rate but still get the warnings and severe er

@julien, I have made a design specification outdoor air object with all values zero does this gave the same results as d

water loops to hot or to cold I am a student working on my thesis, I must evaluated the robustness of a building with OS

I have made a design specification outdoor air object with all values zero does this gave the same results as deleting t

Tank you, to look into the problem and post the problem at OS. I have for a test set all the auto-sized equipment to har

Julien, In this Wetransfer link you can find our model 11-49(error) and the error file on this link. I have implemented

Julien, In this Wetransfer link you can find our model 11-49(error) and the error file on this link. I have implemented

Julien, In this Wetransfer link you can find our model 11-49(error) and the error file on this link. I have implemented

Julien, In this Wetransfer link you can find our model 11-49(error) and the error file on this link. I have implemented

Julien, In this Wetransfer link you can find our model 11-49(error) and the error file link text. I have implemented alr

Julien, I have hard sized the minimum and maximum outdoor air Flow rate but still get the warnings and severe error. Wha

Design Specification Outdoor air Object name blank I am a student working on my thesis. I am modelling a building in OS

Julien, the diffusers are hard sized and I still get the error? How does this come?

Design Specification Outdoor air Object name blank I am a student working on my thesis. I am modelling a building in OS

Design Specification Outdoor air Object name blank I am a student working on my thesis. I am modelling a building in OS

floor cooling and floor heating with borehole I am a master student working on my thesis. I am modelling a building in O

Design Specification Outdoor air Object name blank I am a student working on my thesis. I am modelling a building in OS