Houri's profile - activity

Jamie, how did you resolve the issue in your simulation? Could you advise how I can adjust the ventilation rate?

Thanks Ammar. This completely make sense.

Number of Nodes Conduction Finite difference I used CFD for simulation of two different wall materials. Both are thermal

Number of Nodes Conduction Finite difference I used CFD for simulation of two different wall materials. Both are thermal

increase in heat loss with more insulation thickness. I am using energyPlus to see what is the impact of insulation thic

increase in heat loss with more insulation thickness. I am using energyPlus to see what is the impact of insulation thic

increase in heat loss with more insulation thickness. I am using energyPlus to see what is the impact of insulation thic

I fixed the issue with Dr. Georg Reichard (VT). It was just because for some reason my files were linked to installer in

@Andrew Igdal So for my case it was the long directory address. It was resolved by either saving the file on desktop or

I also have the same issue. opening the "run log" it says: Found error in state 'initialization' with message ["Cannot f

@Aaron, I also have the same issue. opening the "run log" it says: Found error in state 'initialization' with message [

@Aaron, I also have the same issue. opening the rub log it says: Found error in state 'initialization' with message ["C

I am encountering the same failed to save error using OS SKD 3.5.1. This happens after I added "OpenStudio results" meas

Openstudio is installed but OS file doesn't open I have a series of simulations ran from OS 3.2.0. I installed the new v

Openstudio is installed but OS file doesn't open I have a series of simulations ran from OS 3.2.0. I installed the new v

Here is the solution for my question above, which I figured out with Dr. Georg Reichard's help in Virginia Tech. So to

Here is the solution for my question above, which I figured out with Dr. Georg Reichard in Virginia Tech. So to change

@David, Not sure if this helps or not but this the error that I get after the running: Link to the OS File is here "http

@David, Not sure if this helps or not but this the error that I get after the running: Link to the OS File is here "http

@David, Not sure if this helps or not but this the error that I get after the running: Link to the OS File is here "http

@David, Not sure if this helps or not but this the error that I get after the running: Link to the OS File is here "http

I did not change "cooling/heating sizing parameters". Per the explanation from this post: link text I removed the HVAC

I did not change "cooling/heating sizing parameters". link text I removed the HVAC system and turned off the ideal load

@David, Not sure if this helps or not but this the error that I get after the running: Initializing workflow. Processing

@David Goldwasser, I tried both removing the HVAC (VAV) and changing thermostat temp to extreme values but in both case

How can I get variable internal surface temperature with changing outside tempreture? I used surface inside air temperat

How can I get variable internal surface temperature with changing outside tempreture? I used surface inside air temperat

How can I get variable internal surface temperature with changing outside tempreture? I used surface inside air temperat

@David, I tried both removing the HVAC (VAV) and changing thermostat temp to extreme values but in both cases after runn

David, I tried both removing the HVAC (VAV) and changing temp thermostat temp to extreme values but in both cases after

How can I get variable internal surface temperature with changing outside tempreture? I used surface inside air temperat

How can I get variable internal surface temperature with changing outside tempreture? I used surface inside air temperat

How can I get variable internal surface temperature with changing outside tempreture? I used surface inside air temperat

How can I get variable internal surface temperature with changing outside tempreture? I used surface inside air temperat

@Aaron Thank you. Your comments were really helpful and I've got answer to my question.

I am adding this link since the above link does not work anymore. https://github.com/NREL/wex/releases/tag/v1.0.0

I am adding this link as easy access since the above link does not work anymore. https://github.com/NREL/wex/releases/

Time lag and decrement factor Can I measure the time lag and decrement factors of different wall constructions? I am us

@Aaron, Thank you for your answer. I used the "Add output variable" measure to OS measures and ran the simulation, but o

Thank you @Aaron. It was helpful. Where can I find the generated results?

Time lag and decrement factor Can I measure the time lag and decrement factors of different wall constructions? I am us

Time lag and decrement factor Can I measure the time lag and decrement factors of different wall constructions? I am us

Time lag and decrement factor Can I measure the time lag and decrement factors of different wall constructions?

Time lag and decrement factor Can I measure the time lag and decrement factors of different wall constructions?

Time lag and decrement factor Can I measure the time lag and decrement factors of different wall constructions?

Thank you. I've been struggling with the same issue and finally following steps in your comment resolved my simulation i

I updated the body to hourly as well. Do you mind directing me that where I should paste the code and how to execute it.

I updated the body to hourly. Seems like nobody else knows an answer to this. Do you mind giving me directions on where

Is there a measure to get hourly heating and cooling load breakdown? I did a parametric study for the heating and coolin