shifty21's profile - activity

Light Actuator control for lux levels in a zone Hi everyone, I am trying to control the lux levels in a room by artifici

Thanks a lot Aaron! that did the job, I thought that since I only have one zone I should not select that option.

Hi everyone,

I am trying to control the window open, close based on temperature or humidity or any other available sensor. Using the reference file EMSAirflowNetworkOpeningControlByHumidity.idf provided in examples

As mentioned in the Application guide Airflow Network Opening provides an actuator called "AirFlow Network Window/Door Opening, Venting Opening Factor". For this actuator to work we need either of AirflowNetwork:MultiZone:Component: DetailedOpening or AirflowNetwork:MultiZone:Component: SimpleOpening. I have defined both of there but I couldn't find this actuator in the EDD file.

I am attaching my IDF and EDD file with this.

There are no errors but the actuator is not available to use as well. Any help appreciated!

AirFlow Network Window/Door Opening Hi everyone, I am trying to control the window open, close based on temperature or

Thanks a lot for the quick resolution, and yes it would be helpful for others as well if the document reflects the pre-r

Hi everyone, I am trying to control the Slat angle based on the actuator available as per the application guide.

I am able to control shading type to blinds on or off, but I am not able to control the slat angle via actuator.

EnergyManagementSystem:Actuator,
Window1_Shading_Deploy_Status,  !- Name
Sub Surface 1,           !- Actuated Component Unique Name
Window Shading Control,  !- Actuated Component Type
Control Status;          !- Actuated Component Control Type 
EnergyManagementSystem:Actuator,
Window1_slat_angle,  !- Name
Sub Surface 1,           !- Actuated Component Unique Name
Slat Angle Control,  !- Actuated Component Type
Slat Angle;          !- Actuated Component Control Type

Sub Surface 1 is a window, I am unable to find the actuated component type for slat angle, as per the application guide slat angle can be controlled.

Any help appreciated. Google drive link for IDF, EDD and error file

Okay, I updated the link to google drive directory. From what I understood from the simulations, Energyplus only generat

EMS actuator for Slat angle Hi everyone, I am trying to control the Slat angle based on the actuator available as per th

Thanks for the quick response, I started with that only but that gave me this error : * Severe * Invalid Actuated Comp

EMS actuator for Slat angle Hi everyone, I am trying to control the Slat angle based on the actuator available as per th

Thanks for the quick response, I started with that only but that gave me this error : * Severe * Invalid Actuated Comp

Yeah, I started with that and that gave me error * Severe * Invalid Actuated Component Control Type =SLAT ANGLE *

Yeah, I started with that and that gave me error ** Severe ** Invalid Actuated Component Control Type =SLAT ANGLE *

EMS actuator for Slat angle Hi everyone, I am trying to control the Slat angle based on the actuator available as per th