Question-and-Answer Resource for the Building Energy Modeling Community
Get started with the Help page
Ask Your Question

Revision history [back]

click to hide/show revision 1
initial version

When two AirflowNetwork:MultiZone:SpecifiedFlowRate objeects are specified, energyPlus clushes.

Hi all,

I am using EnergyPlus Version 22.1. When I specified two AirflowNetwork:MultiZone:SpecifiedFlowRate objeects in IDF file, EnergyPlus clushed.

https://drive.google.com/file/d/1acIUsscnTZeJMlwdvlxM5TsgDOVXpMSh/view?usp=share_link

The IDF file linked is only a partially modified version of a sample file. Two Cracks were replaced with SpecifiedFlowRate.

The console displayed the following messages.

EnergyPlus Starting

EnergyPlus, Version 22.1.0-ed759b17ee, YMD=2023.03.06 11:04

Adjusting Air System Sizing

Adjusting Standard 62.1 Ventilation Sizing

Initializing Simulation

The ERR file was broken off in the middle and there was no clear description of the error.

Is there anything wrong with the above IDF file description? Or is this a glitch or limitation of EnergyPlus?

Thanks.

When two AirflowNetwork:MultiZone:SpecifiedFlowRate objeects are specified, energyPlus clushes.

Hi all,

I am using EnergyPlus Version 22.1. When I specified two AirflowNetwork:MultiZone:SpecifiedFlowRate objeects in IDF file, EnergyPlus clushed.

https://drive.google.com/file/d/1acIUsscnTZeJMlwdvlxM5TsgDOVXpMSh/view?usp=share_link

The IDF file linked is only a partially modified version of a sample file. Two Cracks were replaced with SpecifiedFlowRate.

The console displayed the following messages.

EnergyPlus Starting

EnergyPlus, Version 22.1.0-ed759b17ee, YMD=2023.03.06 11:04

Adjusting Air System Sizing

Adjusting Standard 62.1 Ventilation Sizing

Initializing Simulation

The ERR file was broken off in the middle and there was no clear description of the error.

Is there anything wrong with the above IDF file description? Or is this a glitch or limitation of EnergyPlus?

Thanks.

When two AirflowNetwork:MultiZone:SpecifiedFlowRate objeects are specified, energyPlus clushes.clashes.

Hi all,

I am using EnergyPlus Version 22.1. When I specified two AirflowNetwork:MultiZone:SpecifiedFlowRate objeects in IDF file, EnergyPlus clushed.clashed.

https://drive.google.com/file/d/1acIUsscnTZeJMlwdvlxM5TsgDOVXpMSh/view?usp=share_link

The IDF file linked is only a partially modified version of a sample file. Two Cracks were replaced with SpecifiedFlowRate.

The console displayed the following messages.

EnergyPlus Starting

EnergyPlus, Version 22.1.0-ed759b17ee, YMD=2023.03.06 11:04

Adjusting Air System Sizing

Adjusting Standard 62.1 Ventilation Sizing

Initializing Simulation

The ERR file was broken off in the middle and there was no clear description of the error.

Is there anything wrong with the above IDF file description? Or is this a glitch or limitation of EnergyPlus?

Thanks.

When two AirflowNetwork:MultiZone:SpecifiedFlowRate objeects are specified, energyPlus clashes.

Hi all,

I am using EnergyPlus Version 22.1. When I specified two AirflowNetwork:MultiZone:SpecifiedFlowRate objeects in IDF file, EnergyPlus clashed.

https://drive.google.com/file/d/1acIUsscnTZeJMlwdvlxM5TsgDOVXpMSh/view?usp=share_link

The IDF file linked is only a partially modified version of a sample file. Two Cracks were replaced with SpecifiedFlowRate.

The console displayed the following messages.

EnergyPlus Starting

EnergyPlus, Version 22.1.0-ed759b17ee, YMD=2023.03.06 11:04

Adjusting Air System Sizing

Adjusting Standard 62.1 Ventilation Sizing

Initializing Simulation

The ERR file was broken off in the middle and there was no clear description of the error.

Is there anything wrong with the above IDF file description? Or is this a glitch or limitation of EnergyPlus?

Thanks.

When two AirflowNetwork:MultiZone:SpecifiedFlowRate objeects are specified, energyPlus clashes.

Hi all,

I am using EnergyPlus Version 22.1. When I specified two AirflowNetwork:MultiZone:SpecifiedFlowRate objeects in IDF file, EnergyPlus clashed.

https://drive.google.com/file/d/1acIUsscnTZeJMlwdvlxM5TsgDOVXpMSh/view?usp=share_link

The IDF file linked is only a partially modified version of a sample file. Two Cracks were replaced with SpecifiedFlowRate.

The console displayed the following messages.

EnergyPlus Starting

EnergyPlus, Version 22.1.0-ed759b17ee, YMD=2023.03.06 11:04

Adjusting Air System Sizing

Adjusting Standard 62.1 Ventilation Sizing

Initializing Simulation

The ERR file was broken off in the middle and there was no clear description of the error.

Is there anything wrong with the above IDF file description? Or is this a glitch or limitation of EnergyPlus?

Thanks.