Question-and-Answer Resource for the Building Energy Modeling Community
Get started with the Help page
Ask Your Question

Revision history [back]

Fatal error when using energyplus

Severe * Control Type Schedule=ZONE CONTROL TYPE * ~~~ * ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone. * ~~~ * ..reference ZoneControl:Thermostat=SPACE1 * ~~~ * ..reference ZONE=4DABF8 * Severe * Control Type Schedule=ZONE CONTROL TYPE * ~~~ * ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone. * ~~~ * ..reference ZoneControl:Thermostat=SPACE2 * ~~~ * ..reference ZONE=5C1065 * Severe * Control Type Schedule=ZONE CONTROL TYPE * ~~~ * ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone. * ~~~ * ..reference ZoneControl:Thermostat=SPACE3 * ~~~ * ..reference ZONE=A3C193 * Severe * Control Type Schedule=ZONE CONTROL TYPE * ~~~ ** ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone.

This is a severe error and am unable to rectify it.... This error comes for all the zones of my case..

How to rectify it.. Iam using energyplus with sketchup am not using openstudio.

click to hide/show revision 2
retagged

updated 2017-08-08 09:17:10 -0600

Neal Kruis's avatar

Fatal error when using energyplus

Severe * Control Type Schedule=ZONE CONTROL TYPE * ~~~ * ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone. * ~~~ * ..reference ZoneControl:Thermostat=SPACE1 * ~~~ * ..reference ZONE=4DABF8 * Severe * Control Type Schedule=ZONE CONTROL TYPE * ~~~ * ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone. * ~~~ * ..reference ZoneControl:Thermostat=SPACE2 * ~~~ * ..reference ZONE=5C1065 * Severe * Control Type Schedule=ZONE CONTROL TYPE * ~~~ * ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone. * ~~~ * ..reference ZoneControl:Thermostat=SPACE3 * ~~~ * ..reference ZONE=A3C193 * Severe * Control Type Schedule=ZONE CONTROL TYPE * ~~~ ** ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone.

This is a severe error and am unable to rectify it.... This error comes for all the zones of my case..

How to rectify it.. Iam using energyplus with sketchup am not using openstudio.

click to hide/show revision 3
None

updated 2017-08-08 09:17:37 -0600

Neal Kruis's avatar

Fatal error when using energyplus

Severe * Control Type Schedule=ZONE CONTROL TYPE * ~~~ * ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone. * ~~~ * ..reference ZoneControl:Thermostat=SPACE1 * ~~~ * ..reference ZONE=4DABF8 * Severe * Control Type Schedule=ZONE CONTROL TYPE * ~~~ * ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone. * ~~~ * ..reference ZoneControl:Thermostat=SPACE2 * ~~~ * ..reference ZONE=5C1065 * Severe * Control Type Schedule=ZONE CONTROL TYPE * ~~~ * ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone. * ~~~ * ..reference ZoneControl:Thermostat=SPACE3 * ~~~ * ..reference ZONE=A3C193 * Severe * Control Type Schedule=ZONE CONTROL TYPE * ~~~ ** ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone.

This is a severe error and am unable to rectify it.... This error comes for all the zones of my case..

How to rectify it.. Iam using energyplus with sketchup am not using openstudio.

click to hide/show revision 4
None

updated 2017-08-08 09:18:13 -0600

Neal Kruis's avatar

Fatal error when using energyplus

Severe * Control Type Schedule=ZONE CONTROL TYPE * ~~~ * ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone. * ~~~ * ..reference ZoneControl:Thermostat=SPACE1 * ~~~ * ..reference ZONE=4DABF8 * Severe * Control Type Schedule=ZONE CONTROL TYPE * ~~~ * ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone. * ~~~ * ..reference ZoneControl:Thermostat=SPACE2 * ~~~ * ..reference ZONE=5C1065 * Severe * Control Type Schedule=ZONE CONTROL TYPE * ~~~ * ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone. * ~~~ * ..reference ZoneControl:Thermostat=SPACE3 * ~~~ * ..reference ZONE=A3C193 * Severe * Control Type Schedule=ZONE CONTROL TYPE * ~~~ ** ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone.

This is a severe error and am unable to rectify it.... This error comes for all the zones of my case..

How to rectify it.. Iam using energyplus with sketchup am not using openstudio.

click to hide/show revision 5
None

updated 2017-08-08 09:18:46 -0600

Neal Kruis's avatar

Fatal error when using energyplus

Severe * Control Type Schedule=ZONE CONTROL TYPE * ~~~ * ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone. * ~~~ * ..reference ZoneControl:Thermostat=SPACE1 * ~~~ * ..reference ZONE=4DABF8 * Severe * Control Type Schedule=ZONE CONTROL TYPE * ~~~ * ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone. * ~~~ * ..reference ZoneControl:Thermostat=SPACE2 * ~~~ * ..reference ZONE=5C1065 * Severe * Control Type Schedule=ZONE CONTROL TYPE * ~~~ * ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone. * ~~~ * ..reference ZoneControl:Thermostat=SPACE3 * ~~~ * ..reference ZONE=A3C193 * Severe * Control Type Schedule=ZONE CONTROL TYPE * ~~~ ** ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone.

This is a severe error and am unable to rectify it.... it....

Severe  ** Control Type Schedule=ZONE CONTROL TYPE
   **   ~~~   ** ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone.
   **   ~~~   ** ..reference ZoneControl:Thermostat=SPACE1
   **   ~~~   ** ..reference ZONE=4DABF8
 ** Severe  ** Control Type Schedule=ZONE CONTROL TYPE
   **   ~~~   ** ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone.
   **   ~~~   ** ..reference ZoneControl:Thermostat=SPACE2
   **   ~~~   ** ..reference ZONE=5C1065
   ** Severe  ** Control Type Schedule=ZONE CONTROL TYPE
   **   ~~~   ** ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone.
   **   ~~~   ** ..reference ZoneControl:Thermostat=SPACE3
   **   ~~~   ** ..reference ZONE=A3C193
   ** Severe  ** Control Type Schedule=ZONE CONTROL TYPE
   **   ~~~   ** ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone.

This error comes for all the zones of my case..

How to rectify it.. Iam using energyplus with sketchup am not using openstudio.

click to hide/show revision 6
retagged

updated 2017-08-08 09:26:43 -0600

__AmirRoth__'s avatar

Fatal error when using energyplus

This is a severe error and am unable to rectify it....

Severe  ** Control Type Schedule=ZONE CONTROL TYPE
   **   ~~~   ** ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone.
   **   ~~~   ** ..reference ZoneControl:Thermostat=SPACE1
   **   ~~~   ** ..reference ZONE=4DABF8
 ** Severe  ** Control Type Schedule=ZONE CONTROL TYPE
   **   ~~~   ** ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone.
   **   ~~~   ** ..reference ZoneControl:Thermostat=SPACE2
   **   ~~~   ** ..reference ZONE=5C1065
   ** Severe  ** Control Type Schedule=ZONE CONTROL TYPE
   **   ~~~   ** ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone.
   **   ~~~   ** ..reference ZoneControl:Thermostat=SPACE3
   **   ~~~   ** ..reference ZONE=A3C193
   ** Severe  ** Control Type Schedule=ZONE CONTROL TYPE
   **   ~~~   ** ..specifies control type 1 (ThermostatSetpoint:SingleHeating) as the control type. Not valid for this zone.

This error comes for all the zones of my case..

How to rectify it.. Iam using energyplus with sketchup am not using openstudio.

About | Help | Privacy | Legal | Contact
Site design and logo: Copyright © 2015 Big Ladder Software LLC. All rights reserved.
The Unmet Hours and Big Ladder names and logos are trademarks of Big Ladder Software LLC.
User contributions licensed under the Creative Commons Attribution Share Alike 3.0 License.
Powered by