Revision history [back]

Hello all,

I have been having some issues with exporting my models to CBECC. My primary issue is with the calculation of floor area, see my errors as follows: Space 'FF Bedroom 205' has zero volume.

Space 'FF Bedroom 205' has zero floor area.

Cannot compute floor print for space 'FF Bedroom 205'.

Space 'FF Bedroom 205' has less than 1 floor surfaces.

Space 'FF Bedroom 205' has less than 3 wall surfaces.

Space 'FF Bedroom 205' has less than 1 roof or ceiling surfaces.

Cannot compute floor print for space 'FF Bedroom 206'.

Cannot compute floor print for space 'FF Bedroom 207'.

In this model I continue to have issues for the same area of the building with every measure taken to fix it seems two are created, resulting in a maddening endless loop of zero progress. Any and all help is greatly appreciated!

Thanks,

Dustin

Hello all,

I have been having some issues with exporting my models to CBECC. My primary issue is with the calculation of floor area, see my errors as follows: Space 'FF Bedroom 205' has zero volume.

Space 'FF Bedroom 205' has zero floor area.

Cannot compute floor print for space 'FF Bedroom 205'.

Space 'FF Bedroom 205' has less than 1 floor surfaces.

Space 'FF Bedroom 205' has less than 3 wall surfaces.

Space 'FF Bedroom 205' has less than 1 roof or ceiling surfaces.

Cannot compute floor print for space 'FF Bedroom 206'.

Cannot compute floor print for space 'FF Bedroom 207'.

In this model I continue to have issues with the failure to calculate floor area. The area comes into the editor program fine and runs but when I try to export into CBECC-COM the error is triggered. This happens for the same area of the building consistently, with every measure taken to fix it seems two new issues are created, resulting in a maddening endless loop of zero progress. Any and all help is greatly appreciated!

Thanks,

Dustin

Hello all,

I have been having some issues with exporting my models to CBECC. My primary issue is with the calculation of floor area, see my errors as follows: Space 'FF Bedroom 205' has zero volume.

Space 'FF Bedroom 205' has zero floor area.

Cannot compute floor print for space 'FF Bedroom 205'.

Space 'FF Bedroom 205' has less than 1 floor surfaces.

Space 'FF Bedroom 205' has less than 3 wall surfaces.

Space 'FF Bedroom 205' has less than 1 roof or ceiling surfaces.

Cannot compute floor print for space 'FF Bedroom 206'.

Cannot compute floor print for space 'FF Bedroom 207'.

In this model I continue to have issues with the failure to calculate floor area. The area comes into the editor program fine and runs but when I try to export into CBECC-COM the error is triggered. This happens for the same area of the building consistently, with every measure taken to fix it seems two new issues are created, resulting in a maddening endless loop of zero progress. Any and all help is greatly appreciated!

Thanks,

Dustin

Hello all,

I have been having some issues with exporting my models to CBECC. My primary issue is with the calculation of floor area, see my errors as follows: Space 'FF Bedroom 205' has zero volume.

Space 'FF Bedroom 205' has zero floor area.

Cannot compute floor print for space 'FF Bedroom 205'.

Space 'FF Bedroom 205' has less than 1 floor surfaces.

Space 'FF Bedroom 205' has less than 3 wall surfaces.

Space 'FF Bedroom 205' has less than 1 roof or ceiling surfaces.

Cannot compute floor print for space 'FF Bedroom 206'.

Cannot compute floor print for space 'FF Bedroom 207'.

In this model I continue to have issues with the failure to calculate floor area. The area comes into the editor program fine and runs but when I try to export into CBECC-COM the error is triggered. This happens for the same area of the building consistently, with every measure taken to fix it seems two new issues are created, resulting in a maddening endless loop of zero progress. Any and all help is greatly appreciated!

Thanks,

Dustin

Hello all,

I have been having some issues with exporting my models to CBECC. My primary issue is with the calculation of floor area, see my errors as follows: Space 'FF Bedroom 205' has zero volume.

Space 'FF Bedroom 205' has zero floor area.

Cannot compute floor print for space 'FF Bedroom 205'.

Space 'FF Bedroom 205' has less than 1 floor surfaces.

Space 'FF Bedroom 205' has less than 3 wall surfaces.

Space 'FF Bedroom 205' has less than 1 roof or ceiling surfaces.

Cannot compute floor print for space 'FF Bedroom 206'.

Cannot compute floor print for space 'FF Bedroom 207'.

In this model I continue to have issues with the failure to calculate floor area. The area comes into the editor program fine and runs but when I try to export into CBECC-COM the error is triggered. This happens for the same area of the building consistently, with every measure taken to fix it seems two new issues are created, resulting in a maddening endless loop of zero progress. Any and all help is greatly appreciated!

Thanks,

Dustin