Hello, I am trying to add Fanger thermal comfort model in IDF editor, but I found simulation results for "Zone Thermal Comfort Clothing Value" is always 0 (any time, any zone) desipite I have set ' Clothing Schedule' and used it in 'People'.(And I found using 'DynamicClothingModelASHRAE55' as 'Clothing Insulation Calculation Method' has clothing value not 0 ) My EnergyPlus version is 23.1. Here is my schedule for clothing: `Schedule:Compact, Clothing Schedule, !- Name Any Number, !- Schedule Type Limits Name Through: 4/1, For: AllDays, Until: 24:00, 1, Through: 9/30, For: AllDays, Until: 24:00, 0.5, Through: 12/31, For: AllDays, Until: 24:00, 1; And code for 'People'
People, 102_Floor1_Zone3__50_61a6d223 People, !- Name 102_Floor1_Zone3__50_61a6d223, !- Zone or ZoneList or Space or SpaceList Name Office Occupancy, !- Number of People Schedule Name People/Area, !- Number of People Calculation Method , !- Number of People 0.05447834, !- People per Floor Area {person/m2} , !- Floor Area per Person {m2/person} 0.3, !- Fraction Radiant autocalculate, !- Sensible Heat Fraction Activity Schedule, !- Activity Level Schedule Name 3.82e-08, !- Carbon Dioxide Generation Rate {m3/s-W} Yes, !- Enable ASHRAE 55 Comfort Warnings ZoneAveraged, !- Mean Radiant Temperature Calculation Type , !- Surface Name/Angle Factor List Name Work efficiency, !- Work Efficiency Schedule Name ClothingInsulationSchedule, !- Clothing Insulation Calculation Method , !- Clothing Insulation Calculation Method Schedule Name Clothing Schedule, !- Clothing Insulation Schedule Name Air Velocity, !- Air Velocity Schedule Name Fanger, !- Thermal Comfort Model 1 Type AdaptiveASH55, !- Thermal Comfort Model 2 Type AdaptiveCEN15251; !- Thermal Comfort Model 3 Type
