completed data point failure parametricanalysis tool
Dear all,
Kindly i am facing challenges with my model using parametric analysis tool with openstudio. While trying design alternatives using parametric analysis tool , I get an error "completed data point failure". Please anyone solved this problem before your help will be greatly appreciated. I tried my best but no ideas.image description(/upfiles/1720794948584708.png)
(/upfiles/1720795018336322.png)
It would be helpful to post more specific information. Did all of the data points fail or just some? On the
Runtab you can expand each data point and see whether a specific measure caused the failure. You can also access log files for each data point that contain helpful information (but not always).Maybe start there and update your post.
Thanks for your answer. Yes, all data points failed. I tried to use only two alternatives but still failed. I downgraded PAT to the 6.1 version but still failed. I expanded but only the datapoint ID was given and no error was found in the log
If nothing is running then I recommend testing the seed model and measures in the OpenStudio App or CLI to make sure you actually have a viable workflow before going back to PAT.
Thanks, Sir. The seed model ran successfully in the OpenStudio app, and I applied alternatives using OpenStudio measures, which also ran successfully. Based on the outputs from the measures in OpenStudio, I moved to PAT for a better comparative analysis. Unfortunately, it failed. I'm not sure if the issue is related to my Windows system operating, the version of PAT and OpenStudio, or something else i don't know.
Can you load screenshots of your
Design AlternativesandRuntabs after attempting the analysis?