My simulation fails in both energy plus and open studio [closed]

asked 9 years ago

thiathia's avatar

updated 9 years ago

HI! I am a new open studio and energy plus user. when I try to run a simulation it stops at 75% with this message on OP: Processing Input File **FATAL:IP: Errors occurred on processing IDF file. Preceding condition(s) cause termination. EnergyPlus Run Time=00hr 00min 4.00sec

I do not know where the probleme may be

Preview: (hide)

Closed for the following reason duplicate question by David Goldwasser
close date 2015-07-06 12:29:09.428814

Comments

Can you add more on what errors you get? Without having that info it will be difficult to answer your question. See the eplusout.err file to find out errors.

Waseem's avatar Waseem  ( 9 years ago )
1

Also, see this question for general debugging info.

MatthewSteen's avatar MatthewSteen  ( 9 years ago )

I followed your suggested question and coul finally correct my errors and run a simulation Finally! Thx you for your help but I actually have another problem! I cant see any results in the Result viewer.

thiathia's avatar thiathia  ( 9 years ago )

@thiathia can you ask the ResultsViewer question as a new topic. Also provide more details of how you are opening it and what you are seeing. Thanks

David Goldwasser's avatar David Goldwasser  ( 9 years ago )