how can i fix this error in revit?
Hi, i have some problem while running system analysis in Revit 2022 and i got some error message like these. Is there any one can help me? Thanks in advance.
Program Version,EnergyPlus, Version 9.1.0-fafb9d5652, YMD=2022.06.06 13:53, *** Beginning Zone Sizing Calculations * Warning * Weather file location will be used rather than entered (IDF) Location object. * ~~~ * ..Location object=JALAN PRAWIROTAMAN, MERGANGSAN VILLAGE/SUB DISTRICT, YOGYAKARTA DISTRICT, YOGYAKARTA 55153 * ~~~ * ..Weather File Location=Semarang Achmad Yani Intl AP JW IDN ISD-TMYx WMO#=968390 * ~~~ * ..due to location differences, Latitude difference=[0.85] degrees, Longitude difference=[4.92E-003] degrees. * ~~~ * ..Time Zone difference=[0.0] hour(s), Elevation difference=[99.43] percent, [521.93] meters. * Warning * ProcessScheduleInput: Schedule:Day:Interval="160 FOOD COURT (UNCONDITIONED) OCC SCH DEFAULT", Blank Schedule Type Limits Name input -- will not be validated. * Warning * ProcessScheduleInput: Schedule:Day:Interval="160 FOOD COURT (UNCONDITIONED) OCC SCH SUMMER DESIGN DAY", Blank Schedule Type Limits Name input -- will not be validated. * Warning * ProcessScheduleInput: Schedule:Day:Interval="160 FOOD COURT (UNCONDITIONED) OCC SCH WINTER DESIGN DAY", Blank Schedule Type Limits Name input -- will not be validated. * Warning * ProcessScheduleInput: Schedule:Day:Interval="AC-1 OCC SCH DEFAULT", Blank Schedule Type Limits Name input -- will not be validated. * Warning * ProcessScheduleInput: Schedule:Day:Interval="AC-1 OCC SCH SUMMER DESIGN DAY", Blank Schedule Type Limits Name input -- will not be validated. * Warning * ProcessScheduleInput: Schedule:Day:Interval="AC-1 OCC SCH WINTER DESIGN DAY", Blank Schedule Type Limits Name input -- will not be validated. * Warning * ProcessScheduleInput: Schedule:Day:Interval="AC-10 OCC SCH DEFAULT", Blank Schedule Type Limits Name input -- will not be validated. * Warning * ProcessScheduleInput: Schedule:Day:Interval="AC-10 OCC SCH SUMMER DESIGN DAY", Blank Schedule Type Limits Name input -- will not be validated. * Warning * ProcessScheduleInput: Schedule:Day:Interval="AC-10 OCC SCH WINTER DESIGN DAY", Blank Schedule Type Limits Name input -- will not be validated. * Warning * ProcessScheduleInput: Schedule:Day:Interval="AC-11 OCC SCH DEFAULT", Blank Schedule Type Limits Name input -- will not be validated. * Warning * ProcessScheduleInput: Schedule:Day:Interval="AC-11 OCC SCH SUMMER DESIGN DAY", Blank Schedule Type Limits Name input -- will not be validated. * Warning * ProcessScheduleInput: Schedule:Day:Interval="AC-11 OCC SCH WINTER DESIGN DAY", Blank Schedule Type Limits Name input -- will not be validated. * Warning * ProcessScheduleInput: Schedule:Day:Interval="AC-12 OCC SCH DEFAULT", Blank Schedule Type Limits Name input -- will not be validated. * Warning * ProcessScheduleInput: Schedule:Day:Interval="AC-12 OCC SCH SUMMER DESIGN DAY", Blank Schedule Type Limits Name input -- will not be validated. * Warning * ProcessScheduleInput: Schedule:Day:Interval="AC-12 OCC SCH WINTER DESIGN DAY", Blank Schedule Type Limits Name input -- will not be validated. * Warning * ProcessScheduleInput: Schedule:Day:Interval="AC-13 OCC SCH DEFAULT", Blank Schedule Type Limits Name input -- will not be validated. * Warning * ProcessScheduleInput: Schedule:Day:Interval="AC-13 OCC SCH SUMMER DESIGN DAY", Blank Schedule Type Limits Name input -- will not be validated. * Warning * ProcessScheduleInput: Schedule:Day:Interval="AC-13 OCC SCH WINTER DESIGN DAY", Blank Schedule Type Limits Name input -- will not be validated. * Warning * ProcessScheduleInput: Schedule:Day:Interval="AC-14 OCC SCH ...
Just to clarify. I don't see a severe or fatal error here. Are the simulation running successfully? Some of the warnings like
* Warning * ProcessScheduleInput: Schedule:Day:Interval="160 FOOD COURT (UNCONDITIONED) OCC SCH DEFAULT", Blank Schedule Type Limits Name input -- will not be validated.are not anything to worry about, but if you have questions about a specific warning can you point out the waring you are asking about.thank you for your answer. After I fix the unclosed analytical energy model, I get the result from system analysis but does the process really take a long time? I was running the simulation from 8.30 pm to 10 pm it wasn't finished yet and finally I stopped. strangely, I still get the simulation results even though the calculated area is not complete
You lost me a bit with this comment, you might need to provide me with more details of your workflow and what is happening. Not sure what you are referring to about
calculated area is not complete, and did E+ plus finish running, did the OpenStudio workflow fail downstream of that?i use revit to 3D modelling and system analysis button in revit to running the energy simulation. My model have an area 6.183 meter square but the result i got just simulated 2.167 meter square. What should i do with this problem? My lecturer said that i should check my model energy, i already did, but still, i get the same result until last night. Actually, i just need energy consumption monthly. I already have the annually data from Green Building Studio, but i don't have Run Chart button in my GBS to get the monthly data.
i try the simulation again this morning and i get this warning:
Severe * DetermineShadowingCombinations: There are 70 surfaces which are casting surfaces and are non-convex. * ~~~ * ...Shadowing values may be inaccurate. Check .shd report file for more surface shading details * ~~~ ** ...Add Output:Diagnostics,DisplayExtraWarnings; to see individual severes for each surface.
What should i do with this in Revit?