Exterior wall thermal properties multiplier
Hi,
I am using the Exterior wall thermal properties multiplier or Pct change measures in PAT to do a parametric study but everytime the simulation fails. Is there anything that I am missing here?
Best,
Can you confirm the baseline model runs prior to the measure being applied, can you provide any log messages the measure reports, and what the EnergyPlus Error is, assuming is is a failed simulation vs. a failed measure run. If you are doing a manual local run you should be able to expand a datapoint to get more details, or you can look at the out.osw file for the datapoint. This post may be helpful
Dear @David Goldwasser, thanks for your response. Yes, I can confirm that the baseline model runs fine. But, the measure reports some issues as follows:
https://drive.google.com/file/d/1mB2T...