My model crashes and I lose all geometry
Hi all,
Not sure how else to describe it. I'm using Sketchup 2018 with OpenStudio v2.7.0 enabled and I'm creating a energy model. I have different floor heights, with my mixed use first floor 15' and the rest 12'. So I do the floor layout the first floor. I save it and save a copy. I use "Create Spaces From Diagram". I can't do all 5 floors, so I just do the one for 15'. I'm periodically saving the model in addition to the auto-save. Everything is going going along fine and then suddenly I get an error message, something is wrong work my geometry. Not sure what I did to create the error. So I exit and reload Sketchup. Of course the attached .osm that looks like what I was working on appears, but so does the dialog box telling I have to reload the .osm file. When I do this I either get a wire frame of my model and screw it, nothing works. So I exit and relaunch Sketchup only this time I open the .osm without opening the .skp file. Nothing. No .osm file loads.
Starting over with the copy I made, I find this too is also a wire frame. Not the layout I save with the rectangle I created that was grey and all my outlines for the floor. That point where I would normally click "Create Spaces From Diagram". Again, nothing I do gets me back to where I need to be.
I have rebooted my machine and run nothing else but Sketchup thinking maybe there's a conflicting DLL. And still get the same problem. Is Sketchup and OpenStudio supposed to be this buggy? Or am I not doing something I should be doing? HIs there a better solution than Sketchup and OpenStudio for modeling the energy performance of either existing or new construction?
Getting really frustrated here.
@mark.stout It sounds like you are using the File / Save menu, which will ONLY save the .skp file. You want to save the .osm file for OpenStudio, which you do in the Extensions / OpenStudio / Save menu (or in the OpenStudio toolbar you see in SketchUp). Is this the case?
Nope. I have been saving the both the Sketchup file and the OpenStudio file. Just redo the floor layout to the point where I would use "Create Spaces From Diagram" I saved both files, and I saved a backup of both files. Closed down Sketchup, relaunch Sketchup, loan the Sketchup file, it loads fine. Get the dialog box telling it's going to unload the .osm file. Say OK. The click to open the .osm file and either get a Bug Splat error, or the file loads but it's in wireframe. Same thing happens when I load the backup I created. Relaunching Sketchup the Sketchup person is also wireframe.
Now when I try to load just the .osm file, I get nothing. My floor layout is not there. Looks like a brand new startup page. When I open it in OpenStudio and click the Geometry tab, I get nothing. It takes about minutes to layout the floor and I've done it like 5 times over the last two days. This is on WIndows 10 if that means anything.
You only want to be working with the .osm file -- don't bother with the .skp file. So, only save the .osm file and only open the .osm file when working in SketchUp. When you open the .skp file, then click "unload the .osm file", that is likely what's messing you up.
Is that corrupting the .osm file?
I just created a 100'x300 rectangle. Offset the walls 6". Created the border for the retail space and lobby. Saved it,. Exited Sketchup. Loaded Sketchup. Loaded just the .osm file and nothing!! But if I create some geometry other than just laying out the floor plan, I can load the model using just the .osm open command. I should be able to draw a rectangle, do nothing more, save it and be able to reload the .osm file and continue working.
If you're only drawing rectangles before saving the .osm, then you're not creating any OpenStudio content to save. The "Create Spaces from Diagram" tool will turn your SketchUp rectangle into an OpenStudio space with 6 surfaces (roof, floor, and 4 walls). Without using that tool, you're really not adding anything to the OpenStudio file ending in .osm. I'll note that spaces in OpenStudio can have 1 surface as a minimum. Regarding your last sentence -- no, you cannot just draw a rectangle, save the .osm file, and reload that. A surface must be part of a space for it to remain in the file.