Dehumidification

asked 2018-05-06 05:03:04 -0600

Dongmin's avatar

updated 2018-05-07 08:05:15 -0600

__AmirRoth__'s avatar

Hello,

I'm trying to keep the RH of a single zone building to a specific level (30%). I have added Humidification Schedule sets to the Thermal zone, and also added the DX Dehumidifier zone equipment to the thermal zone. When I ran the simulation, my heating load has gone missing, it only shows District Cooling Load, Zone Lighting and Equipment Loads.

Thanks in advance,

My model is attached below (weather file, OSM file, Sketchup File)

https://drive.google.com/drive/folder...

edit retag flag offensive close merge delete

Comments

@Dongmin please tag the application you using ( I presume it is OS). If you can post a link to your model.

Avi's avatar Avi  ( 2018-05-06 06:54:24 -0600 )edit

Yep I am running the OS 2.5.0.

Sorry, Im not sure how to link my model onto a post? :(

Dongmin's avatar Dongmin  ( 2018-05-06 07:01:49 -0600 )edit

@Dongmin use one of the web service like Dropbox , create a link and post it here

Avi's avatar Avi  ( 2018-05-06 07:29:34 -0600 )edit

No worries, just updated the post. Thank you!

Dongmin's avatar Dongmin  ( 2018-05-06 07:47:40 -0600 )edit

@Dongmin Please explain some more what you are aiming at, as you don't have any HVAC component to heat or cool the zone. I would try to eliminate the Dehumidifier then use Ideal Air Loads with the Measure from BCL

Avi's avatar Avi  ( 2018-05-06 09:18:00 -0600 )edit
see more comments